Nortel Networks NN44200-313 quick start Verifying that you can leave a message, Step Action

Verifying that each CallPilot channel is functioning correctly 57

3Type the test mailbox number for the telephone you are on, followed by the # key.

4Type the password for the mailbox, followed by the # key.

The default password is 12 + mailbox number. For example, if the mailbox number is 4500 the password is 124500.

5When prompted, type a new password, followed by the # key. Re-enter the new password followed by the # key to confirm the changed password.

—End—

Verifying that you can leave a message

Perform the following procedure to check that you can leave a message.

Step Action

1On a test telephone, dial the DN of that telephone.

You are automatically forwarded to CallPilot voice messaging.

2After the tone, leave a test message.

—End—

Verifying that you can retrieve a message

Perform the following procedure to check that you can retrieve a message.

Step Action

1On a test telephone, dial the CallPilot voice messaging CDN.

2Log on to the mailbox where the message was left in the procedure "Verifying that you can leave a message" (page 57).

3Press 2 on the telephone to play the message.

—End—

Verifying that each CallPilot channel is functioning correctly

Perform the following procedure to check that CallPilot channels are functioning correctly.

Nortel CallPilot

Quickstart Guide

NN44200-313 01.02 Standard

5.019 May 2008

Copyright © 2007-2008, Nortel Networks