Nortel Networks Optivity Switch manual Lists the Vlan Manager menus and commands

Chapter 4 Using VLAN Manager 59

Table 12 lists the VLAN Manager menus and commands.

Table 12 VLAN Manager menus and commands

Menu	Command	Shortcut Key	Description
File	Reload	[Ctrl]+R	Reloads the VLAN Manager
			information.
	Save	[Ctrl]+S	Saves diagnostic information about the
	Diagnostic		STGs and VLAN discovered.
	Info
	Print	[Ctrl]+P	Opens the Print dialog box, where you
			enter print parameters.
	Close		Closes the VLAN Manager window.
Edit	Undo	[Ctrl]+Z	Reverses any changes you made to an
	Changes		item or field.
	Copy	[Ctrl]+C	Copies the contents of a selected cell.
	Paste	[Ctrl]+V	Pastes the cell contents to a new
			location.
	Insert	[Insert]	Opens the Insert dialog box, where you
			insert an STG or VLAN on selected
			devices.
	Delete	[Del]	Removes a selection and displays a
			message to confirm deletion of the
			selected VLAN.
	Apply	[Ctrl]+A	When you have made changes to your
	Changes		VLAN configuration, this command
			applies these changes to the devices in
			the network.
	Edit MAC		Allows you to insert the text file
	Address		containing the MAC addresses for
			MAC-based VLANs.
	Find	[Ctrl]+F	Opens the Find dialog box, where you
			set parameters to find matching entries
			in your network.
View	Highlight		Highlights the VLAN topology map in the
	Topology		Optivity Switch Manager contents pane.
	Audit		Queries the network configuration to
			report any discrepancies.

Using Optivity Switch Manager, Release 1.1.0.0