Nortel Networks Optivity Switch manual Describes the fields in the Configuration table

72Chapter 4 Using VLAN Manager

Figure 25 Configuration table

Table 21 describes the fields in the Configuration table.

Table 21 Configuration table fields

Field	Description
Device	IP address, system name, or host name of the device.
Priority	The Spanning Tree Protocol (STP) bridge priority, in decimal.
	The range is 0 (highest priority) to 65535 (lowest priority). The
	default is 32768.
BridgeMaxAge	The value in hundredths of a second that all bridges use for
	MaxAge when this bridge is acting as the root.
	Note: The 802.1D-1990 standard specifies that the range for
	this parameter is related to the value of dot1dStp\Time.
	The default is 2000 (20 seconds).
BridgeHelloTime	The value in hundredths of a second that all bridges use for
	Hello Time when this bridge is acting as the root. The granularity
	of this timer is specified by the IEEE 802.1D-1990 standard to
	be in increments of 1/100 of a second. The default is 200
	seconds.
BridgeForwardDelay	The value in hundredths of a second that all bridges use for
	Forward Delay when this bridge is acting as the root. The default
	is 1500 (15 seconds).
EnableStp	Enables or disables the spanning tree algorithm for the spanning
	tree group.
StpTrapEnable	Enables or disables SNMP traps to be sent to trace receiver
	every time an STP topology change occurs.

208963-B