Chapter 4 Using VLAN Manager 87

10In the Mask text box, type the IP subnet mask.

11Select the device to be configured on the VLAN by doing one of the following:

Select from the device list.

Click On All Devices to select all devices in the list.

12Click Ok.

13Do one of the following:

From the VLAN Manager menu bar, choose Apply Changes.

On the VLAN Manager toolbar, click Apply Changes.

Creating a protocol-based VLAN

To create a protocol-based VLAN:

1In the navigation pane, select an STG.

2Do one of the following:

From the menu bar, choose Edit > Insert.

On the toolbar, click Insert.

The New VLAN dialog box opens (Figure 34).

Using Optivity Switch Manager, Release 1.1.0.0

Page 87
Image 87
Nortel Networks Optivity Switch manual Creating a protocol-based Vlan