|
| Chapter 4 Using VLAN Manager 81 |
|
|
|
| Table 25 New STG dialog box items (continued) | |
|
|
|
| Item | Description |
|
|
|
| BridgeHelloTime | Value in hundredths of a second that all bridges use for Hello |
|
| Time when this bridge is acting as the root. The granularity of this |
|
| timer is specified by the IEEE |
|
| increments of 1/100 of a second. The default is 200 seconds. |
|
|
|
| BridgeForwardDelay | Value in hundredths of a second that all bridges use for Forward |
|
| Delay when this bridge is acting as the root. The default is 1500 |
|
| (15 seconds). |
|
|
|
| Enable Stp | Enables or disables the spanning tree algorithm for the spanning |
|
| tree group. |
|
|
|
| Enable Stp Traps | Enables SNMP traps to be sent to trace receiver every time an |
|
| STP topology change occurs. |
|
|
|
| On All Devices | When checked, selects all devices listed in the list. Otherwise, |
|
| select the individual devices to be added to the STG. |
|
|
|
Editing a spanning tree group
To edit a spanning tree group:
1Select an STG folder.
2In the STG table in the contents pane, click the item that you want to edit. The field is highlighted, and you can edit directly in the table.
3Type information in the text boxes, or select from a list. The changes appear in bold.
4On the VLAN Manager toolbar, click Apply Changes.
Deleting a spanning tree group
To delete a spanning tree group:
1In the navigation pane, select an STG folder except STG 1, and do one of the following:
•From the VLAN Manager menu bar, choose Edit > Delete.
•On the VLAN Manager toolbar, click Delete.
Using Optivity Switch Manager, Release 1.1.0.0
