Sending a Broadcast Fax

1Load the document.

2

Enter the programmed location. Use a One-Touch key, 2-

Notes

! If Auto Start is set to ON (default setting) you will have

 

or 3– Digit Speed Dial, Group Directory, or enter a

 

number on the numeric keypad.

2 seconds between steps 2 and 3 (if using a Speed Dial

3

Press Enter.

and only after the first entry) to input the next location

4

Repeat Steps 2 and 3 until all locations for the broadcast

before machine begins dialing. To change this, set Auto

 

are input.

Start (User Function #42) to OFF.

 

For more information, refer to the Notes, below.

 

To delete a location from the broadcast, refer to the

 

following section, “Deleting a Location from a

 

Broadcast Fax.”

 

5At this point, you have three options.

Press Enter to display the locations for the broadcast. Press Enter twice to print the locations for the broadcast. Press Start to begin faxing.

User’s Guide: English 125

Page 125
Image 125
Oki 5780 manual Sending a Broadcast Fax