Oki 5780 manual Message Confirmation Report Options, MCF Single-Loc, MCF Multi-Loc, Image in MCF

Message Confirmation Report Options

Message Confirmation Report (MCF) is a very convenient feature that is often used on a daily basis to ensure that faxes were sent or arrived at the proper destinations. Use the following functions to set MCF parameters.

MCF (Single-Loc)

Speed Access no. 70

Set to ON, an MCF automatically prints for single location transmissions.

Set to OFF, no report prints.

The default setting is OFF.

MCF (Multi-Loc)

Speed Access no. 71

Set to ON, single and multiple location transmission MCFs automatically print.

Set to OFF, no report prints.

The default setting is ON.

Image in MCF

Speed Access no. 72

Set to ON, the entire first page of the fax transmitted prints in the MCF.

Set to OFF, no image prints in the report.

The default setting is ON.

Err. Report (MCF)

Speed Access no. 73

Set to ON, an error report automatically prints if a fax communication is not successful.

Set to OFF, the report does not automatically print.

The default setting is ON.

!The Service Code 0000 on an MCF Report means that the fax communication was successful.

198 OKIFAX 5780/5980