Built-In ACD Supervisor Guide

Section 521

 

 

5.Repeat steps 1 to 4 to set insertion of other program lines, and end programming at the END/DISC line.

Note:

If you press soft key 10 and select List at any of the above steps, the List Mode screen is redisplayed.

The END/DISC line cannot be changed nor deleted.

DELETE (FF3)

SEARCH 1,015,010

01:DELETE(LINE)

To Delete Program

Data, Press 0 and

HOLD Key.

List

PLAY 7,1

01:Select FFKey

SEARCH 1,020,010

RET 02,010

PLAY 9,0

This command deletes the current setting of displayed program lines. Deletion can be repeated up to 19 lines.

The following screen display shows an example of deletion of line 01.

1.Confirm the specified line to be deleted, and press the HOLD key.

Example: Line 01 is deleted.

2.The program line that was displayed is deleted, and the List Mode screen is re-displayed.

When the specified line is deleted, each subsequent program line is shifted up.

END/DISC

Note:

Note: If you press soft key 10 and select List at any of the above steps, the List Mode screen is redisplayed.

10

S-ICX (International) issued October 2000

S-ICX-5.0-521 (ACD 4.0)

Page 14
Image 14
Panasonic S-ICX technical manual Delete FF3