Section 521 Built-In ACD Supervisor Guide
S-ICX-5.0-521 (ACD 4.0) S-ICX (International) issued October 2000 11
ALL DELETE (FF6)
This command deletes all settings currently set to all lines in the currently
displayed program.
1. Press key 0, and the HOLD key.
2. All of the program that was displayed is deleted, and only the
default END/DISC line is displayed.
Note: If you press soft key 10 and select List at any of the above steps, the
List Mode screen is redisplayed.
Program Delete:
DELETE(Program)
To Delete Program
Data, Press 0 and
HOLD Key List→
END/DISK
01:Select FFKey