Paradyne 336x E1 manual Far End Group, DS1/E1 MIB, DS1 Fractional Group, DS1/E1 MIB

ACCULINK 336x E1 NTU

Near End Group ± The DS1 Current Table Objects (dsx1CurrentEntry)

The following DS1 current table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1CurrentIndex ± The index that identifies the E1 interface.

•dsx1CurrentESs ± Errored Seconds for the current interval.

•dsx1Current SESs ± Severely Errored Seconds for the current interval.

•dsx1CurrentUASs ± Unavailable Seconds for the current interval.

•dsx1CurrentBESs ± Bursty Errored Seconds for the current interval.

Near End Group ± The DS1 Interval Table Objects (dsx1IntervalEntry)

The following DS1 interval table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1IntervalIndex ± The index that identifies the E1 interface.

•dsx1IntervalNumber ± The interval number (1 to 96).

•dsx1IntervalESs ± Errored Seconds for the interval.

•dsx1Interval SESs ± Severely Errored Seconds for the interval.

•dsx1IntervalUASs ± Unavailable Seconds for the interval.

•dsx1Interval BESs ± Bursty Errored Seconds for the interval.

Near End Group ± The DS1 Total Table Objects (dsx1TotalEntry)

The following DS1 total table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1TotalIndex ± The index that identifies the E1 interface.

•dsx1TotalESs ± The 24-hour total Errored Seconds.

•dsx1Total SESs ± The 24-hour total Severely Errored Seconds.

•dsx1TotalUASs ± The 24-hour total Unavailable Seconds.

•dsx1TotalBESs ± The 24-hour total Bursty Errored Seconds.

Far End Group, DS1/E1 MIB

The DS1 Far End Group consists of the following three tables:

•DS1 Far End Current

•DS1 Far End Interval

•DS1 Far End Total

These tables are not supported for either the network or G.703 DTE interface.

The DS1 Fractional Group, DS1/E1 MIB

The DS1 Fractional group consists of the DS1 fractional table. This table (dsx1FracTable) is fully supported by the 336x NTUs and allows channel (time slots) to be mapped between the E1 interfaces and data ports. If an invalid channel map (e.g., two interfaces mapped to a single time slot, one interface mapped to two E1s, etc.) is received, an error is returned to the SNMP manager. The E1 NTU validates all channel configurations before applying them.

Operational Note: The fractional E1 group only allows specification of an entire interface to a particular time slot on another interface (i.e., a time slot on one interface cannot be mapped to a time slot on another interface). This prevents complete mapping of time slots on the G.703 DTE interface to time slots on the network interface. For mapping time slots between the network and G.703 DTE interfaces, the following convention is used: Time slots on the E1 interface that are mapped to another E1 interface (i.e., not a data port) are connected in ascending order. For example, if the fractional table for the network interface maps time-slots 1, 3 and 5 to the G.703 DTE interface and the G.703 DTE interface maps time-slots 10, 11 and 15 to the network, the following time slots are connected: N1 to D10, N3 to D11, and N5 to D15.

E-10 December 1996 3360-A2-GB20-20