Paradyne 336x E1 Displaying DS0 Channel Assignments, Display Channel Symbols, Symbol Meaning

Operation

NOTE

The following procedures are examples only. Screen displays may vary depending on the model and configuration of the E1 NTU.

Displaying DS0 Channel Assignments

Use the Display command (in the Channel Configuration branch) to view how the DS0 channels are currently allocated.

Line 1 of the display shows the 31 channels of the

selected interface. Pressing the or key scrolls the channels onto the screen in groups of three. Line 2 displays what is allocated to the DS0 channel listed in Line 1. Symbols used in the display are shown in

Table 3-5.

		Table 3-5
	Display Channel Symbols
Symbol		Meaning
±		The DS0 channel is not allocated.
Prtn		The DS0 channel is allocated to Port n,
		where n is 1, 2, 3, or 4.
Nn		The DS0 channel is allocated to the
		network interface DS0 channel n, where
		n can be any number from 1 through 31.
Dn		The DS0 channel is allocated to the
		G.703 DTE interface DS0 channel n,
		where n can be any number from 1
		through 31.

To display the DS0 channel allocation,

1.From the top-level menu screen, select Cnfig.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Select Edit.

4.From the Edit screen, press the key until the Chan selection appears on the screen.

5.Select Chan.

Edit:

Port NET Chan

F1 F2 F3

6.From the Channel Config screen, select Dsply (display).

Channel Config:

Dsply Clear DTE

F1 F2 F3

7.From the Display Chan screen, select NET to display the channels allocated to the network interface.

Display Chan:

NET DTE Ports

F1 F2 F3

Or, select DTE to display the channels allocated to the G.703 DTE interface.

Display Chan:

NET DTE Ports

F1 F2 F3

3360-A2-GB20-20 December 1996 3-27