Patterns Send 32767 511 1in8, Test Started | Paradyne 336x E1

ACCULINK 336x E1 NTU

4.From the Patterns Send screen, press F1 to send a 32767 pattern, F2 to send a 511 pattern, F3 to send

a 1-in-8 pattern, or press the key and the appropriate Function key to send a QRSS pattern.

Patterns: Send 32767 511 1in8

F1 F2 F3

If you send a 32767 or 1-in-8 pattern, skip Step 5.

5.From the Send screen, press the Function key that corresponds to the port for which you want to send a test pattern. Use the scroll keys, if necessary.

The Test Started screen appears.

Send: Name and Dest

Test Started

F1 F2 F3

If the E1 NTU is already sending the test pattern you selected, the message Already active appears. If you selected an incompatible test pattern combination, the message Invld Test Combo appears. See Table 4-10for valid combinations.

Send: Name

Prt1 Prt2 Prt3

F1 F2 F3

Table 4-10

Valid Send Test Pattern Combinations

	32767 (Network)	511 (Port)	1-in-8 (Network)	QRSS (Port)

32767 (Network)	N/A	NO	NO	NO

511 (Port)	NO	YES (on	NO	YES (on
		separate ports)		separate ports)

1 in 8 (Network)	NO	NO	N/A	NO

QRSS (Port)	NO	YES (on	NO	YES (on
		separate ports)		separate ports)

4-22

December 1996

3360-A2-GB20-20

Image 80

Paradyne 336x E1 manual Patterns Send 32767 511 1in8, Test Started, Send Name Prt1 Prt2 Prt3, Network Qrss Port

Contents

Acculink 336x E1 Network Termination Unit Warranty, Sales, and Service Information TrademarksOperators Guide 3360-A2-GB20-20 Copyright 1996 Paradyne Corporation. All rights reserved Important Safety Instructions Table of Contents Glossary Index Preface Objectives and Reader AssumptionsRelated Document Reference Documents Overview FeaturesIntroduction Alarm Message Capability DTE InterfaceFront Panel Emulation Snmp Management Support Front Panel Physical DescriptionRear Panel Model 3360 Rear Panel AUX Port Installation Application Examples Network Snmp Connection Examples EDL is only available on 2-port and 4-port E1 NTUs Connection through a LAN Adapter to Snmp Important Instructions Optional Power SourcesInstalling the +24 Vdc Power Supply Installing the Single ±48 Vdc Power Supply 10. ±48 Vdc Single Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply 11. ±48 Vdc Redundant Source Power Supply Pinouts Cabling Examples 12. Cabling Examples Power-Up Self-Test E1 Hdsl NTU Operation Using the Front Panel E1 NTU Front Panel Keypad LCD Test Jacks LEDs Network Interface LEDs System LEDsName Color Meaning DTE Port LEDs SIG Data Port LEDs DTR Displaying Unit Identity Hdsl LED Displaying LED Conditions Status Perf TStat LEDSelect LEDs E1 Prt1 Prt2 LED Display Test NetSig1 Changing Configuration Options Selecting the G.703 DTE or Data Port for LED DisplayLED Dsply DTE DTE Displaying/Editing Configuration Options Load from Activ Cust1Choose Funct Edit Save Edit DTE Port NET Saving Edit Changes Selecting/Copying to a Specific PortSave Edit to Activ Cust1 Port Select Copy Prt1 Prt2 Configuring the E1 NTU for Snmp Management Selecting the PortCopy From Prt1 Prt2 Prt3 Copy To All Prt1 Prt2 Setting the IP Address Snmp Com Link Next PPP Slip Selecting the Link Layer Protocol010.155.111.222 Up Down Save Public Up Down Save Specifying the Community Names and Access TypesCommunityName1 Next Edit Clear Configuring Snmp Traps Access Next Read R/WEnabling Snmp Trap Messages Snmp Trap Next Enab Disab Num Trap Mgrs1 Next Configuring a Destination for Snmp TrapsSelecting the Number of Trap Managers Configuring DS0 Channels Trapn Dst Next None Com DTE Interface Network Interface Network Interface Network Channel Allocation DTE Interface Channel Allocation Example of Channel Allocation with TS16 Available for Data Example of Interface Worksheet with TS16 Available for Data 10. Port Channel Configuration Worksheet Ports 1 Port Chan Options Value Conf 11. Port Channel Configuration Worksheet Ports 3 Displaying DS0 Channel Assignments Display Channel SymbolsSymbol Meaning Allocating Data Ports Prt1EditDTE Port NET Block Channel Assignment Method Individual Channel Assignment Method DTE Channels TS16 Assign TS16Data Data Rsvd CAS Clearing DS0 Channel Allocation Clear ChannelNET DTE Port1 12. Common Clocking Configurations Selecting the Timing Source Configuring for Network Timing Configuring for External TimingEdit NET Chan Gen Pri Clk SrcNET Next NET DTE Acquiring/Releasing User Interface Acquiring the Active User InterfaceReleasing the Active User Interface Clock Rate2048 Next 2048 Resetting the E1 NTU Control ClrReg ResetDevice Reset Yes No Download Operations E1 NTU User Interface Access Security Maintenance Self-Test Health Status Hdsl DevHS STestSelfTst Health Passed Self-Test Health Messages Health and Status Messages Device Health and StatusDevice H/S LOS on Loop1 Port and 4-port E1 NTUs Hdsl Loop Performance Messages Hdsl Loop PerformanceLp1 SigQ=xx Performance Reports Status DevHS STest PerfPerformance NET DTE Prt1 NET Registers E1 Lp1 Lp2 E1 Hdsl DTE VldIntvl CurTimerEvent StEvnt Complete Alarms Snmp Trap per Interface Trap Meaning Snmp TrapsEnterprise-Specific Trap Definitions Trap Value Event Troubleshooting Troubleshooting Symptom Possible Cause Solutions AIS at DTE X x x x x Test Jacks Dclbup Dclbdn Test CommandsRemote Loopback Tests Valid Loopback Combinations DLB does not appear when DTE interface is disabledLocal Loopback Tests Loopback Abort LLB PLB Starting a Line LoopbackStarting a Payload Loopback Starting a DTE Loopback Starting a Repeater LoopbackLoopback LLB PLB DLB Starting a Data Channel Loopback PLB DLB RLBDLB RLB Dclb Loopback Dclb Prt1 Prt2 Prt3 Starting a Data Terminal Loopback Aborting LoopbacksRLB Dclb Dtlb Loopback Dtlb Prt1 Prt2 Prt3 Test Patterns Sending Test PatternsLoopback Abort All LLB PLB Patterns Send 32767 511 1in8 Test StartedSend Name Prt1 Prt2 Prt3 8 Network Qrss Port Monitoring Test Patterns Aborting Test PatternsPatterns Mon 32767 Qrss Monitor Name Prt1 Prt2 Prt3 Lamp Test Starting a Lamp Test Displaying E1 NTU Test Status Aborting a Lamp Test0123456789 = ? @ABCDEFGHIJKLMNO Test Status Messages Front Panel Menu a E1 Hdsl NTU Technical Specifications B Models 3360/3364/3365 NTUs Technical SpecificationsSpecifications Criteria Table B-1 Approvals Configuration Options C DTE Interface Configuration Options DTE Interface Configuration Options Table C-1 DTE Interface Configuration Options Port Configuration Options Table C-2 Port Configuration OptionsPort Type E530 Next E530 V.35 RS449 X.21 Prev Net Dclb Disab Next Enab Disab Prev All Ones Both Next Disab DTR RTS Both Prev Rcv RAI Halt Next None Halt PrevTx Clock Int Next Int Ext Prev InvertTxC Disab Next Enab Disab Prev EDL Disab Next Enab Disab Prev Near-end Disab Next Disab Maint Send Both Prev Far-end Disab Next Disab Maint Prev Mgmt Link Disab Next Disab Snmp Prev Network Interface Configuration Options Table C-3 Network Interface Configuration Options Channel Configuration Options Table C-4 DTE Channel Configuration Options Table C-5 Data Port Channel Configuration Options Channel Config Dsply Clear DTE Prt1 Prt2 Prt3 Prt4Assign To NET Next NET DTE Prtn Prtn Prtn Prev Assign By Block Next Block Chan Prev Port Rate Next 192 256 320 384 448 512 576 640 704 768 832 896 960 10241152 1216 1280 1344 1472 1536 1600 N10 N11 N12 N31 Next Prev D10 D11 D12 D31 Clock Rate Next 2048 8 Prev General Configuration OptionsTable C-6 General Configuration Options User Interface Configuration Options Table C-7 User Interface Configuration Options Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 Prev Char Length Next 7 8 PrevCParity None Next None Even Odd Prev CStop Bits Next 1 1.5 2 Prev Aux Rate Next 9.6 14.4 19.2 38.4 Prev Ignore DTR No Next Yes No PrevAux Use None Next None Snmp Daisy Prev Alarm Configuration Options Table C-8 Alarm Configuration OptionsAlrm Msg Disab Next Enab Disab Prev Snmp Trap Disab Next Enab Disab Prev Snmp Configuration Options Table C-9 General Snmp Configuration Options Access 2 Read Next Read R/W Prev CommunityName2 Next Edit Clear PrevIP Adr Next Edit Clear Prev NetMask Next Edit Clear Prev Com Link PPP Next PPP Slip Prev Com IP Adr Next Edit Clear PrevCom NetMask Next Edit Clear Prev Aux IP Adr Next Edit Clear Prev Aux NetMask Next Edit Clear Prev Table C-10 Snmp Trap Configuration Options Num Trap Mgrs Next 1 2 3 4 5 6 PrevTrapn IP Adr Next Edit Clear Prev Gen Trap Both Next Disab Warm Auth Both Prev Trap I/F All Next NET DTE E1s Ports All Prev Entp Trap Enab Next Enab Disab PrevLink Trap Both Next Disab Up Down Both Prev Configuration Worksheets Prt1 Options Value Prt2 Options ValuePrt3 Options Value Prt4 Options Value Network Interface Network Channel Allocation Port Chan Options Value Conf Port Chan Options Value Conf General Snmp Value Options Snmp Trap Value Options Hdsl Network Interface Table D-1 Hdsl Network Connector Signal Pin NumberPin Assignments D Table D-2 DTE Connector 120 Ohm Signal Pin Number DTE Interface Table D-3 AUX Port Connector Signal Direction Pin Number AUX Port Interface Table D-4 COM Port Connector Signal Direction Pin Number COM Port Interface Figure D-2. COM Port-to-PC Cable Direction Pin Mnemonic Number EIA 530A Port Interface ConnectorTable D-5 EIA 530A Port Interface Connector Signal Circuit EIA 530A-to-RS449 Cable Interface Figure D-4. EIA 530A-to-RS449 Cable Table D-6 RS449 Cable Interface Signal Circuit EIA 530A-to-V.35 Cable Interface Figure D-5. EIA 530A-to-V.35 Cable Table D-7 Cable Interface Signal Direction Pin Number EIA 530A-to-X.21 Cable Interface Figure D-6. EIA 530A-to-X.21 Cable Table D-8 Cable Interface Signal Table D-9 DC Power Connector Signal Pin Number Power Input ConnectorOptional DC Power Cable Table D-10 External Clock Connector Signal Pin Number External Clock Interface Snmp MIB Objects E Management Information Base MIB II RFC System Group, MIB Interface Group, MIB Interface Group ± ªifIndexº Object ifEntry Interface Group ± ªifMtuº Object ifEntry Interface Group ± ªifLastChangeº Object ifEntry IP Group, MIB IP Group ± ªipRouteTableº Object ip Transmission Group, MIB Icmp Group, MIBUDP Group, MIB Snmp Group, MIB DS1/E1 MIB RFC Near End Group, DS1/E1 MIB Near End Group ± ªdsx1LoopbackConfigº Object dsx1ConfigEntry Far End Group, DS1/E1 MIB DS1 Fractional Group, DS1/E1 MIB RS-232-like MIB RFC General Port Table, RS-232-like MIB Asynchronous Port Table, RS-232-like MIB Input Signal Table, RS-232-like MIB Output Signal Table, RS-232-like MIBGeneric-Interface Extension MIB RFC Synchronous Port Table, RS-232-like MIB Generic Interface Test Table, Generic Interface MIB Paradyne Enterprise MIB Correlation between Menu Commands and Snmp Objects Set dsx1LoopbackConfig for NET E1 to dsx1LineLoop Set dsx1LoopbackConfig for NET E1 to dsx1NoLoopSet dsx1LoopbackConfig for NET E1 to dsx1PayloadLoop Set dsx1LoopbackConfig for DTE E1 to dsx1LineLoop Set dsx1LoopbackConfig for port n to noTest External Set/Display dsx1FracNumber and dsx1FracIfindex for DTE E1 Display rs232PortInSpeed or rs232PortOutSpeed for port n IP Network Addressing Scenario F IP Network Addressing 135.18.1.2 Installing Front Panel Emulation Software Front Panel Emulation G Starting Front Panel Emulation Equipment Feature Number Equipment List H Glossary Activ BNC CRC4 DSR ISO LOF PDU RFC RIP RJ48C RLB TXC Index Index-2 Index Index-4 Synchronous data port. See Port 1±4 interface Index-6