Paradyne 336x E1 manual Starting a Lamp Test

ACCULINK 336x E1 NTU

4.From the Patterns Abort screen, press the desired Function key to abort either All active test patterns, active Send test patterns, or the active Monitor (Mon) test pattern.

Patterns: Abort

All Send Mon

F1 F2 F3

If you select All, the E1 NTU terminates all active test patterns and displays the message Command Complete. Skip Step 5.

NOTE

Be careful when selecting a specific test pattern to abort. If you mistakenly choose to abort a test pattern that is not currently running, a Command Complete message still displays and the test pattern currently active still runs. You can use the TStat branch of the menu to view the test status to determine if the abort was successful.

5.From the Abort screen, press the Function key that corresponds to the network or port for which you want to abort a test pattern. Use the scroll keys, if necessary.

Abort: Send or Mon

NET Prt1 Prt2

F1 F2 F3

The E1 NTU terminates the selected test pattern and displays the message Command Complete.

Lamp Test

Use the Lamp Test commands to start and stop a test of the E1 NTU front panel LCD and LEDs.

Starting a Lamp Test

To start a Lamp test,

1.From the top-level menu screen, select Test.

2.From the Test screen, press the key until the Lamp selection appears on the screen.

Test:
Rlpbk	Lpbk	Ptrns
F1	F2	F3

3. From the Test screen, select Lamp.

Test:
Lpbk	Ptrns	Lamp
F1	F2	F3

4. From the Lamp Test screen, select Start.

Lamp Test:

Abort Start

F1 F2 F3

4-24 December 1996 3360-A2-GB20-20