N10 N11 N12 N31 Next Prev D10 D11 D12 D31 | Paradyne 336x E1

Configuration Options

Table C-5

(3 of 3)

Data Port Channel Configuration Options

N1

N2

N3

N4

N5

N6

N7

N8

N9

N10

N11

N12 ...

N31

Next

±

±

±

±

±

±

±

±

±

±

±

±

...

Prev

OR

D1

D2

D3

D4

D5

D6

D7

D8

D9

D10

D11

D12 ...

D31

Next

±

±

±

±

±

±

±

±

±

±

±

-±

...

Prev

Data Port Channel Allocation (appears for the individual channel method only). Designates the DS0 channel to allocate to this port (N1±N31 for the network interface and D1±D31 for the G.703 DTE interface).

Line 1 displays the 31 channels for the network interface or the G.703 DTE interface. Line 2 displays what is allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:

Value Meaning

±This DS0 channel is not allocated. You can modify this value on this screen.

Prtn This DS0 channel is allocated to port n, where n is a number from 1 to 4. You can modify this value on this screen for this port only.

Nn This DS0 channel is allocated to the network interface DS0 channel n, where n is a number from 1 to 31. You cannot modify this value on this screen.

Dn This DS0 channel is allocated to the G.703 DTE interface DS0 channel n, where n is a number from 1 to 31. You can modify this value on this screen.

Select the channel by pressing the Function key under that number. To deallocate a port, press the Function key under that port number. Pressing the Function key under channels assigned to other ports has no effect.

NOTE: The E1 NTU automatically derives the data rate for the port from the number of DS0 channels allocated.

NOTE: If time-slot 16 is reserved for signaling , D16 automatically connects to N16 and cannot be changed from this screen.

NOTE: For the 3364 NTU there is a hardware limitation that limits the combined bandwidth used by Port 1 and Port 3 to a total of 2048 kbps and the combined bandwidth used by Port 2 and Port 4 to 2048 kbps. If a selection of Prtn causes this limit to be exceeded, the selection is ignored and the ª±º will continue to be displayed for the channel.

3360-A2-GB20-20

December 1996

C-11

Image 98

Paradyne 336x E1 manual N10 N11 N12 N31 Next Prev D10 D11 D12 D31, Value Meaning

Contents

Acculink 336x E1 Network Termination Unit Operators Guide 3360-A2-GB20-20 Warranty, Sales, and Service InformationTrademarks Copyright 1996 Paradyne Corporation. All rights reserved Important Safety Instructions Table of Contents Glossary Index Related Document PrefaceObjectives and Reader Assumptions Reference Documents Overview FeaturesIntroduction Front Panel Emulation Alarm Message CapabilityDTE Interface Snmp Management Support Front Panel Physical DescriptionRear Panel Model 3360 Rear Panel AUX Port Installation Application Examples Network Snmp Connection Examples EDL is only available on 2-port and 4-port E1 NTUs Connection through a LAN Adapter to Snmp Important Instructions Optional Power SourcesInstalling the +24 Vdc Power Supply Installing the Single ±48 Vdc Power Supply 10. ±48 Vdc Single Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply 11. ±48 Vdc Redundant Source Power Supply Pinouts Cabling Examples 12. Cabling Examples Power-Up Self-Test E1 Hdsl NTU Operation Using the Front Panel E1 NTU Front Panel Keypad LCD Test Jacks LEDs Network Interface LEDs System LEDsName Color Meaning DTE Port LEDs SIG Data Port LEDs DTR Displaying Unit Identity Hdsl LED Select LEDs E1 Prt1 Prt2 Displaying LED ConditionsStatus Perf TStat LED LED Display Test NetSig1 LED Dsply DTE Changing Configuration OptionsSelecting the G.703 DTE or Data Port for LED Display DTE Choose Funct Edit Save Displaying/Editing Configuration OptionsLoad from Activ Cust1 Edit DTE Port NET Save Edit to Activ Cust1 Saving Edit ChangesSelecting/Copying to a Specific Port Port Select Copy Prt1 Prt2 Copy From Prt1 Prt2 Prt3 Configuring the E1 NTU for Snmp ManagementSelecting the Port Copy To All Prt1 Prt2 Setting the IP Address Snmp Com Link Next PPP Slip Selecting the Link Layer Protocol010.155.111.222 Up Down Save Public Up Down Save Specifying the Community Names and Access TypesCommunityName1 Next Edit Clear Enabling Snmp Trap Messages Configuring Snmp TrapsAccess Next Read R/W Snmp Trap Next Enab Disab Num Trap Mgrs1 Next Configuring a Destination for Snmp TrapsSelecting the Number of Trap Managers Configuring DS0 Channels Trapn Dst Next None Com DTE Interface Network Interface Network Interface Network Channel Allocation DTE Interface Channel Allocation Example of Channel Allocation with TS16 Available for Data Example of Interface Worksheet with TS16 Available for Data 10. Port Channel Configuration Worksheet Ports 1 Port Chan Options Value Conf 11. Port Channel Configuration Worksheet Ports 3 Displaying DS0 Channel Assignments Display Channel SymbolsSymbol Meaning EditDTE Port Allocating Data PortsPrt1 NET Block Channel Assignment Method Individual Channel Assignment Method DTE Channels TS16 Assign TS16Data Data Rsvd CAS NET DTE Clearing DS0 Channel AllocationClear Channel Port1 12. Common Clocking Configurations Selecting the Timing Source Edit NET Chan Gen Configuring for Network TimingConfiguring for External Timing Pri Clk SrcNET Next NET DTE Releasing the Active User Interface Acquiring/Releasing User InterfaceAcquiring the Active User Interface Clock Rate2048 Next 2048 Device Reset Yes No Resetting the E1 NTUControl ClrReg Reset Download Operations E1 NTU User Interface Access Security Maintenance SelfTst Health Passed Self-Test HealthStatus Hdsl DevHS STest Self-Test Health Messages Health and Status Messages Device Health and StatusDevice H/S LOS on Loop1 Port and 4-port E1 NTUs Hdsl Loop Performance Messages Hdsl Loop PerformanceLp1 SigQ=xx Performance NET DTE Prt1 Performance ReportsStatus DevHS STest Perf NET Registers E1 Lp1 Lp2 E1 Hdsl DTE VldIntvl CurTimerEvent StEvnt Complete Alarms Snmp Trap per Interface Trap Meaning Snmp TrapsEnterprise-Specific Trap Definitions Trap Value Event Troubleshooting Troubleshooting Symptom Possible Cause Solutions AIS at DTE X x x x x Test Jacks Dclbup Dclbdn Test CommandsRemote Loopback Tests Valid Loopback Combinations DLB does not appear when DTE interface is disabledLocal Loopback Tests Loopback Abort LLB PLB Starting a Line LoopbackStarting a Payload Loopback Loopback Starting a DTE LoopbackStarting a Repeater Loopback LLB PLB DLB DLB RLB Dclb Starting a Data Channel LoopbackPLB DLB RLB Loopback Dclb Prt1 Prt2 Prt3 RLB Dclb Dtlb Starting a Data Terminal LoopbackAborting Loopbacks Loopback Dtlb Prt1 Prt2 Prt3 Loopback Abort All Test PatternsSending Test Patterns LLB PLB Send Name Prt1 Prt2 Prt3 Patterns Send 32767 511 1in8Test Started 8 Network Qrss Port Patterns Mon 32767 Qrss Monitoring Test PatternsAborting Test Patterns Monitor Name Prt1 Prt2 Prt3 Lamp Test Starting a Lamp Test 0123456789 = ? Displaying E1 NTU Test StatusAborting a Lamp Test @ABCDEFGHIJKLMNO Test Status Messages Front Panel Menu a E1 Hdsl NTU Specifications Criteria Technical Specifications BModels 3360/3364/3365 NTUs Technical Specifications Table B-1 Approvals Configuration Options C DTE Interface Configuration Options DTE Interface Configuration Options Table C-1 DTE Interface Configuration Options Port Type E530 Next E530 V.35 RS449 X.21 Prev Port Configuration OptionsTable C-2 Port Configuration Options Net Dclb Disab Next Enab Disab Prev Tx Clock Int Next Int Ext Prev All Ones Both Next Disab DTR RTS Both PrevRcv RAI Halt Next None Halt Prev InvertTxC Disab Next Enab Disab Prev EDL Disab Next Enab Disab Prev Near-end Disab Next Disab Maint Send Both Prev Far-end Disab Next Disab Maint Prev Mgmt Link Disab Next Disab Snmp Prev Network Interface Configuration Options Table C-3 Network Interface Configuration Options Channel Configuration Options Table C-4 DTE Channel Configuration Options Assign To NET Next NET DTE Prtn Prtn Prtn Prev Table C-5 Data Port Channel Configuration OptionsChannel Config Dsply Clear DTE Prt1 Prt2 Prt3 Prt4 Assign By Block Next Block Chan Prev 1152 1216 1280 1344 Port Rate Next192 256 320 384 448 512 576 640 704 768 832 896 960 1024 1472 1536 1600 N10 N11 N12 N31 Next Prev D10 D11 D12 D31 Clock Rate Next 2048 8 Prev General Configuration OptionsTable C-6 General Configuration Options User Interface Configuration Options Table C-7 User Interface Configuration Options CParity None Next None Even Odd Prev Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 PrevChar Length Next 7 8 Prev CStop Bits Next 1 1.5 2 Prev Aux Rate Next 9.6 14.4 19.2 38.4 Prev Ignore DTR No Next Yes No PrevAux Use None Next None Snmp Daisy Prev Alrm Msg Disab Next Enab Disab Prev Alarm Configuration OptionsTable C-8 Alarm Configuration Options Snmp Trap Disab Next Enab Disab Prev Snmp Configuration Options Table C-9 General Snmp Configuration Options IP Adr Next Edit Clear Prev Access 2 Read Next Read R/W PrevCommunityName2 Next Edit Clear Prev NetMask Next Edit Clear Prev Com Link PPP Next PPP Slip Prev Com IP Adr Next Edit Clear PrevCom NetMask Next Edit Clear Prev Aux IP Adr Next Edit Clear Prev Aux NetMask Next Edit Clear Prev Trapn IP Adr Next Edit Clear Prev Table C-10 Snmp Trap Configuration OptionsNum Trap Mgrs Next 1 2 3 4 5 6 Prev Gen Trap Both Next Disab Warm Auth Both Prev Trap I/F All Next NET DTE E1s Ports All Prev Entp Trap Enab Next Enab Disab PrevLink Trap Both Next Disab Up Down Both Prev Configuration Worksheets Prt3 Options Value Prt1 Options ValuePrt2 Options Value Prt4 Options Value Network Interface Network Channel Allocation Port Chan Options Value Conf Port Chan Options Value Conf General Snmp Value Options Snmp Trap Value Options Hdsl Network Interface Table D-1 Hdsl Network Connector Signal Pin NumberPin Assignments D Table D-2 DTE Connector 120 Ohm Signal Pin Number DTE Interface Table D-3 AUX Port Connector Signal Direction Pin Number AUX Port Interface Table D-4 COM Port Connector Signal Direction Pin Number COM Port Interface Figure D-2. COM Port-to-PC Cable Direction Pin Mnemonic Number EIA 530A Port Interface ConnectorTable D-5 EIA 530A Port Interface Connector Signal Circuit EIA 530A-to-RS449 Cable Interface Figure D-4. EIA 530A-to-RS449 Cable Table D-6 RS449 Cable Interface Signal Circuit EIA 530A-to-V.35 Cable Interface Figure D-5. EIA 530A-to-V.35 Cable Table D-7 Cable Interface Signal Direction Pin Number EIA 530A-to-X.21 Cable Interface Figure D-6. EIA 530A-to-X.21 Cable Table D-8 Cable Interface Signal Table D-9 DC Power Connector Signal Pin Number Power Input ConnectorOptional DC Power Cable Table D-10 External Clock Connector Signal Pin Number External Clock Interface Snmp MIB Objects E Management Information Base MIB II RFC System Group, MIB Interface Group, MIB Interface Group ± ªifIndexº Object ifEntry Interface Group ± ªifMtuº Object ifEntry Interface Group ± ªifLastChangeº Object ifEntry IP Group, MIB IP Group ± ªipRouteTableº Object ip UDP Group, MIB Transmission Group, MIBIcmp Group, MIB Snmp Group, MIB DS1/E1 MIB RFC Near End Group, DS1/E1 MIB Near End Group ± ªdsx1LoopbackConfigº Object dsx1ConfigEntry Far End Group, DS1/E1 MIB DS1 Fractional Group, DS1/E1 MIB RS-232-like MIB RFC General Port Table, RS-232-like MIB Asynchronous Port Table, RS-232-like MIB Generic-Interface Extension MIB RFC Input Signal Table, RS-232-like MIBOutput Signal Table, RS-232-like MIB Synchronous Port Table, RS-232-like MIB Generic Interface Test Table, Generic Interface MIB Paradyne Enterprise MIB Correlation between Menu Commands and Snmp Objects Set dsx1LoopbackConfig for NET E1 to dsx1PayloadLoop Set dsx1LoopbackConfig for NET E1 to dsx1LineLoopSet dsx1LoopbackConfig for NET E1 to dsx1NoLoop Set dsx1LoopbackConfig for DTE E1 to dsx1LineLoop Set dsx1LoopbackConfig for port n to noTest External Set/Display dsx1FracNumber and dsx1FracIfindex for DTE E1 Display rs232PortInSpeed or rs232PortOutSpeed for port n IP Network Addressing Scenario F IP Network Addressing 135.18.1.2 Installing Front Panel Emulation Software Front Panel Emulation G Starting Front Panel Emulation Equipment Feature Number Equipment List H Glossary Activ BNC CRC4 DSR ISO LOF PDU RFC RIP RJ48C RLB TXC Index Index-2 Index Index-4 Synchronous data port. See Port 1±4 interface Index-6