ACCULINK 336x E1 NTU

Individual Channel Assignment Method

The Assign By configuration option screen appears after you select a port.

To assign by the individual channel method,

1. Press F3 (Chan).

Assign By:

 

Next

Block

Chan

F1

F2

F3

2.Press F1 (Next) to display the next configuration option (channel allocation).

3.Line 1 displays the 31 channels for the network interface or the G.703 DTE interface, depending on which destination was chosen. This example assumes that the network is the destination. Line 2 displays what is allocated to the DS0 channel

shown in Line 1. Pressing the or key scrolls the channels onto the screen in groups of three. Select the channel by pressing the Function key under the desired number. Portn appears. The port is assigned to that channel. To deallocate a port, press the Function key under that port number. Pressing the Function key under channels assigned to other ports has no effect.

 

N1

N2

Next

Prt1

Prt2

F1

F2

F3

NOTE

N16 will not appear if time-slot 16 (TS16) is reserved for signaling. (The default is TS16 available for data.)

Allocating DS0 Channels from the G.703 DTE Interface to the Network Interface

By using the configuration options, you can allocate DS0 channels from the G.703 DTE interface to the network interface and specify whether time-slot 16 (TS16) is reserved for signaling information.

To allocate DS0 channels from the G.703 DTE interface to the network interface,

1.From the top-level menu screen, select Cnfig.

2.Select the configuration option set to be copied into the Edit area by using the appropriate Function key. Use the scroll keys, if necessary.

3.Select Edit.

4.From the Edit screen, press the key until the Chan selection appears on the screen.

5.Select Chan.

Edit:

Port NET Chan

F1 F2 F3

6. From the Channel Config screen, select DTE.

Channel Config:

Dsply Clear DTE

F1 F2 F3

3-30

December 1996

3360-A2-GB20-20

Page 51
Image 51
Paradyne 336x E1 manual Individual Channel Assignment Method, Edit Port NET Chan