Paradyne 336x E1 manual DTE Port LEDs, Sig

ACCULINK 336x E1 NTU

			Table 3-3
			G.703 DTE Port LEDs
Name	Color		Meaning
SIG	Green	Monitors the signal being received from the G.703 DTE port.
		ON:	A recoverable signal is being received from the G.703 DTE port.
		OFF:	The signal cannot be recovered from the G.703 DTE port (a Loss of
			Signal condition exists).
OOF	Yellow	Monitors Out Of Frame (OOF) conditions on the received G.703 DTE signal.
		ON:	At least one OOF was detected on the signal during the sampling
			period.
		OFF:	No OOFs were detected on the signal during the sampling period.
ALRM	Yellow	Indicates whether an alarm condition exists on the received G.703 DTE signal.
		ON:	An alarm condition (LOS, LOF, EER, RAI, AIS, RMA, MFA) exists on
			the received G.703 DTE signal. Use the Device Health and Status
			command to determine the alarm type.
		OFF:	No alarm condition exists on the G.703 DTE Interface signal.
PDV	Yellow	Monitors Pulse Density Violations (PDV) on the received G.703 DTE signal.
		ON :	At least one PDV was detected (and corrected) on the received
			G.703 DTE signal during the sampling period.
		OFF:	No PDVs were detected on the received G.703 DTE signal during
			the sampling period.
BPV	Yellow	Monitors Bipolar Violations (BPV) on the received G.703 DTE signal.
		ON:	At least one BPV was detected (and corrected) on the received
			G.703 DTE signal during the sampling period.
		OFF:	No BPVs were detected on the received G.703 DTE signal during
			the sampling period.

3-6 December 1996 3360-A2-GB20-20