Paradyne 336x E1 manual Synchronous data port. See Port 1±4 interface

Index

Reset branch	status messages. See messages, status
example of use, 3-36	STest (Self-Test Health) branch
in the menu tree, A-1	example of use, 4-2
Rlpbk (Remote Loopback) branch	in the menu tree, A-1
example of use, 4-15	StEvnt (Status Event) report, 4-9
in the menu tree, A-1	straps. See configuration options
RMA (Remote Multiframe Alarm) condition	subnet, 3-14,C-18,C-19,C-20,F-1
ASCII terminal/printer message, 4-10	switch, rear panel, 1-4,1-5
Device Health and Status message, 4-4	synchronous data port. See PORT (1±4) interface
router applications, 2-2
RS-449 interface, D-8
RX network connector, 1-5	T
RX shield, 1-5
	technical specifications, B-1
	temperature
S	operating, B-2
	storage, B-2
secondary clock	Test branch
configuration option, C-12	example of use, 4-15±4-26
functional description, 3-33	in the menu tree, A-1
self-test	test commands, 4-15±4-26
displaying results, 4-2	front panel LED indications, 3-5
front panel indications, 2-9,3-5	lamp test, 4-24±4-25
troubleshooting, 4-12	local loopback, 4-16±4-21
Send Ones configuration option, C-2,C-4	abort, 4-20±4-21
Serial Line Internet Protocol (SLIP)	data channel loopback (DCLB), 4-19
procedure for configuring, 3-16	data terminal loopback (DTLB), 4-20
used with SNMP system, 1-2,2-3,3-14,F-1	DTE loopback (DLB), 4-18
SES (Severely Errored Seconds) report, 4-8	line loopback (LLB), 4-17
shield, RX, 1-5	payload loopback (PLB), 4-17
SNMP (Simple Network Management Protocol)	repeater loopback (RLB), 4-18±4-19
agent, 1-2	remote loopback, 4-15
configuration options	test messages, 4-25±4-26
examples of use, 3-14±3-20	test patterns, 4-21±4-24
menu tree branches, A-1	test jacks
option table, C-17±C-22	functional description, 4-14
option worksheet, C-28	physical description, 1-3,3-2,3-4
connection examples, 2-3±2-4, 2-8, F-1±F-2	time-slot 16 (TS16)
database, 1-2	channel allocation, 3-20,3-21,3-22
IP addressing, F-1±F-2	configuration option, C-8
manager, 1-2	timing. See clocking
MIBs	traps, SNMP. See SNMP, traps
functional description, 1-2	troubleshooting
list of objects, E-1±E-19	device health, 4-3±4-4
procedure for configuring access, 3-17±3-18	diagnostic table, 4-12±4-13
objects, 1-2	HDSL loop performance, 4-5
principles of operation, 1-2	performance, 4-6±4-9
SNMP Down message, 4-4,4-13	power-up self-test, 2-9,4-2
traps	TStat (Test Status) branch
functional description, 1-2,4-11	example of use, 4-25±4-26
procedure for configuring, 3-18±3-20	in the menu tree, A-1
specifications, environmental, B-1,B-2	TX network connector, 1-5
Stat (Status) branch
examples of use, 3-8,3-10,4-2,4-3,4-5,4-6,4-25
in the menu tree, A-1

3360-A2-GB20-20 December 1996 Index-5