Index

Gen (General) Configuration branch example of use, 3-34±3-35

in the menu tree, A-1option table, C-12option worksheet, C-23

H

HDB3 (High Density Bipolar 3) coding configuration option, C-2Self-Test Health message, 4-2

HDSL (High bit-rate Digital Subscriber Line) branch example of use, 4-5

in the menu tree, A-1

HDSL network. See network interface

I

ID (Identity) branch example of use, 3-8in the menu tree, A-1

indicators. See LEDs, front panel IP (Internet Protocol) addressing

configuration option, C-18,C-19,C-20example of use, F-1±F-2

procedure for configuring, 3-15±3-16,3-19±3-20

liquid crystal display (LCD) failure message, 4-2functional description, 3-3physical description, 1-3,3-2

LOF (Loss Of Frame) condition

front panel LED indication, 3-5,3-6Performance Report message, 4-8

LOFC (Loss Of Frame Count) report, 4-9loopback

front panel LED indication, 3-5local, 4-16±4-21

abort, 4-20±4-21

data channel loopback (DCLB), 4-19data terminal loopback (DTLB), 4-20DTE loopback (DLB), 4-18,C-2,D-2line loopback (LLB), 4-17

payload loopback (PLB), 4-17repeater loopback (RLB), 4-18±4-19

remote, 4-15

LOS (Loss Of Signal) condition ASCII terminal/printer message, 4-10Device Health and Status message, 4-3front panel LED indication, 3-5,3-6Performance Report message, 4-8,4-9Self-Test Health message, 4-2troubleshooting, 4-12

Lpbk (Local Loopback) branch example of use, 4-16±4-21in the menu tree, A-1

K

keypad

operation, 3-3±3-4

physical description, 1-3,3-2

L

lamp test, 4-24±4-25

LAN Adapter, 1-2,1-5,2-3,2-4,3-14,F-1LED Control branch

example of use, 3-11in the menu tree, A-1

LED Status branch example of use, 3-10in the menu tree, A-1

LEDs, front panel

during power-up self-test, 2-9functional description, 3-4±3-7lamp test, 4-24±4-25physical description, 1-3,3-2

line coding, C-2

line loopback (LLB), 4-17link layer protocol, 3-14,3-16link trap, 4-11

M

maintenance

device health and status, 4-3±4-4HDSL loop performance, 4-5performance reporting, 4-6±4-9power-up self-test, 2-9,4-2

manager, SNMP, 1-2menu tree, A-1messages

alarm

Device Health and Status, 4-3Performance Report, 4-8Self-Test Health, 4-2troubleshooting, 4-12

with ASCII terminal/printer, 1-2,4-10status

Device Health and Status, 4-3HDSL loop performance, 4-5Performance Report, 4-8Self-Test Health, 2-9,4-2Test Status, 4-25±4-26

MFA (Multiframe Alarm) condition ASCII terminal/printer message, 4-10Device Health and Status message, 4-4

MIBs, SNMP. See SNMP, MIBs model numbers, H-1

3360-A2-GB20-20

December 1996

Index-3

Page 165
Image 165
Paradyne 336x E1 manual Index