Resetting the E1 NTU, Download Operations | Paradyne 336x E1

ACCULINK 336x E1 NTU

3. From the Control screen, select Rel (Release).

Control:
Rel	LED	ClrReg
F1	F2	F3

The active user interface is released. A screen with this message appears. No user interface is active until input is received from a user interface.

Ft. Panel:

Released

F1 F2 F3

Resetting the E1 NTU

Use the Reset command to perform a power-on reset of the E1 NTU.

To reset the E1 NTU,

1.From the top-level menu screen, press the key until the Ctrl selection appears on the screen.

E1 HDSL NTU

Stat Test Cnfig

F1 F2 F3

2. Select Ctrl.

E1 HDSL NTU

Test	Cnfig	Ctrl
F1	F2	F3

3.From the Control screen, press the key until the Reset selection appears on the screen.

Control:
Rel	LED	ClrReg
F1	F2	F3

4. Select Reset.

Control:

ClrReg Reset

F1 F2 F3

5.From the Device Reset screen, press F1 to initiate a reset of the E1 NTU (the power-up sequence screen appears). Press F2 instead to return to the Control screen without initiating a reset.

Device Reset:

Yes No

F1 F2 F3

Download Operations

NOTE

The Download command is for use by service personnel only. Loss of primary data could result from improper use.

3-36

December 1996

3360-A2-GB20-20

Image 57

Paradyne 336x E1 Resetting the E1 NTU, Download Operations, Ft. Panel Released, Control ClrReg Reset, Device Reset Yes No

Contents

Acculink 336x E1 Network Termination Unit Trademarks Warranty, Sales, and Service InformationOperators Guide 3360-A2-GB20-20 Copyright 1996 Paradyne Corporation. All rights reserved Important Safety Instructions Table of Contents Glossary Index Objectives and Reader Assumptions PrefaceRelated Document Reference Documents Features IntroductionOverview DTE Interface Alarm Message CapabilityFront Panel Emulation Snmp Management Support Physical Description Rear PanelFront Panel Model 3360 Rear Panel AUX Port Application Examples Installation Network EDL is only available on 2-port and 4-port E1 NTUs Snmp Connection Examples Connection through a LAN Adapter to Snmp Optional Power Sources Installing the +24 Vdc Power SupplyImportant Instructions 10. ±48 Vdc Single Source Power Supply Pinouts Installing the Single ±48 Vdc Power Supply 11. ±48 Vdc Redundant Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply 12. Cabling Examples Cabling Examples E1 Hdsl NTU Power-Up Self-Test Operation E1 NTU Front Panel Using the Front Panel LCD Keypad LEDs Test Jacks System LEDs Name Color MeaningNetwork Interface LEDs SIG DTE Port LEDs DTR Data Port LEDs Hdsl Displaying Unit Identity LED Status Perf TStat LED Displaying LED ConditionsSelect LEDs E1 Prt1 Prt2 LED Display Test NetSig1 Selecting the G.703 DTE or Data Port for LED Display Changing Configuration OptionsLED Dsply DTE DTE Load from Activ Cust1 Displaying/Editing Configuration OptionsChoose Funct Edit Save Edit DTE Port NET Selecting/Copying to a Specific Port Saving Edit ChangesSave Edit to Activ Cust1 Port Select Copy Prt1 Prt2 Selecting the Port Configuring the E1 NTU for Snmp ManagementCopy From Prt1 Prt2 Prt3 Copy To All Prt1 Prt2 Snmp Setting the IP Address Selecting the Link Layer Protocol 010.155.111.222 Up Down SaveCom Link Next PPP Slip Specifying the Community Names and Access Types CommunityName1 Next Edit ClearPublic Up Down Save Access Next Read R/W Configuring Snmp TrapsEnabling Snmp Trap Messages Snmp Trap Next Enab Disab Configuring a Destination for Snmp Traps Selecting the Number of Trap ManagersNum Trap Mgrs1 Next Trapn Dst Next None Com Configuring DS0 Channels DTE Interface Network Interface DTE Interface Channel Allocation Network Interface Network Channel Allocation Example of Channel Allocation with TS16 Available for Data Example of Interface Worksheet with TS16 Available for Data Port Chan Options Value Conf 10. Port Channel Configuration Worksheet Ports 1 11. Port Channel Configuration Worksheet Ports 3 Display Channel Symbols Symbol MeaningDisplaying DS0 Channel Assignments Prt1 Allocating Data PortsEditDTE Port NET Block Channel Assignment Method Individual Channel Assignment Method TS16Data Data Rsvd CAS DTE Channels TS16 Assign Clear Channel Clearing DS0 Channel AllocationNET DTE Port1 Selecting the Timing Source 12. Common Clocking Configurations Configuring for External Timing Configuring for Network TimingEdit NET Chan Gen Pri Clk SrcNET Next NET DTE Acquiring the Active User Interface Acquiring/Releasing User InterfaceReleasing the Active User Interface Clock Rate2048 Next 2048 Control ClrReg Reset Resetting the E1 NTUDevice Reset Yes No Download Operations E1 NTU User Interface Access Security Maintenance Status Hdsl DevHS STest Self-Test HealthSelfTst Health Passed Self-Test Health Messages Device Health and Status Device H/S LOS on Loop1Health and Status Messages Port and 4-port E1 NTUs Hdsl Loop Performance Lp1 SigQ=xxHdsl Loop Performance Messages Status DevHS STest Perf Performance ReportsPerformance NET DTE Prt1 NET Registers E1 Lp1 Lp2 E1 Hdsl DTE CurTimer EventVldIntvl Complete StEvnt Alarms Snmp Traps Enterprise-Specific Trap Definitions Trap Value EventSnmp Trap per Interface Trap Meaning Troubleshooting Symptom Possible Cause Solutions Troubleshooting X x x x x AIS at DTE Test Jacks Test Commands Remote Loopback TestsDclbup Dclbdn DLB does not appear when DTE interface is disabled Local Loopback TestsValid Loopback Combinations Starting a Line Loopback Starting a Payload LoopbackLoopback Abort LLB PLB Starting a Repeater Loopback Starting a DTE LoopbackLoopback LLB PLB DLB PLB DLB RLB Starting a Data Channel LoopbackDLB RLB Dclb Loopback Dclb Prt1 Prt2 Prt3 Aborting Loopbacks Starting a Data Terminal LoopbackRLB Dclb Dtlb Loopback Dtlb Prt1 Prt2 Prt3 Sending Test Patterns Test PatternsLoopback Abort All LLB PLB Test Started Patterns Send 32767 511 1in8Send Name Prt1 Prt2 Prt3 8 Network Qrss Port Aborting Test Patterns Monitoring Test PatternsPatterns Mon 32767 Qrss Monitor Name Prt1 Prt2 Prt3 Starting a Lamp Test Lamp Test Aborting a Lamp Test Displaying E1 NTU Test Status0123456789 = ? @ABCDEFGHIJKLMNO Test Status Messages E1 Hdsl NTU Front Panel Menu a Models 3360/3364/3365 NTUs Technical Specifications Technical Specifications BSpecifications Criteria Table B-1 Approvals DTE Interface Configuration Options Configuration Options C Table C-1 DTE Interface Configuration Options DTE Interface Configuration Options Table C-2 Port Configuration Options Port Configuration OptionsPort Type E530 Next E530 V.35 RS449 X.21 Prev Net Dclb Disab Next Enab Disab Prev Rcv RAI Halt Next None Halt Prev All Ones Both Next Disab DTR RTS Both PrevTx Clock Int Next Int Ext Prev InvertTxC Disab Next Enab Disab Prev Near-end Disab Next Disab Maint Send Both Prev EDL Disab Next Enab Disab Prev Mgmt Link Disab Next Disab Snmp Prev Far-end Disab Next Disab Maint Prev Table C-3 Network Interface Configuration Options Network Interface Configuration Options Table C-4 DTE Channel Configuration Options Channel Configuration Options Channel Config Dsply Clear DTE Prt1 Prt2 Prt3 Prt4 Table C-5 Data Port Channel Configuration OptionsAssign To NET Next NET DTE Prtn Prtn Prtn Prev Assign By Block Next Block Chan Prev 192 256 320 384 448 512 576 640 704 768 832 896 960 1024 Port Rate Next1152 1216 1280 1344 1472 1536 1600 N10 N11 N12 N31 Next Prev D10 D11 D12 D31 General Configuration Options Table C-6 General Configuration OptionsClock Rate Next 2048 8 Prev Table C-7 User Interface Configuration Options User Interface Configuration Options Char Length Next 7 8 Prev Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 PrevCParity None Next None Even Odd Prev CStop Bits Next 1 1.5 2 Prev Ignore DTR No Next Yes No Prev Aux Use None Next None Snmp Daisy PrevAux Rate Next 9.6 14.4 19.2 38.4 Prev Table C-8 Alarm Configuration Options Alarm Configuration OptionsAlrm Msg Disab Next Enab Disab Prev Snmp Trap Disab Next Enab Disab Prev Table C-9 General Snmp Configuration Options Snmp Configuration Options CommunityName2 Next Edit Clear Prev Access 2 Read Next Read R/W PrevIP Adr Next Edit Clear Prev NetMask Next Edit Clear Prev Com IP Adr Next Edit Clear Prev Com NetMask Next Edit Clear PrevCom Link PPP Next PPP Slip Prev Aux NetMask Next Edit Clear Prev Aux IP Adr Next Edit Clear Prev Num Trap Mgrs Next 1 2 3 4 5 6 Prev Table C-10 Snmp Trap Configuration OptionsTrapn IP Adr Next Edit Clear Prev Gen Trap Both Next Disab Warm Auth Both Prev Entp Trap Enab Next Enab Disab Prev Link Trap Both Next Disab Up Down Both PrevTrap I/F All Next NET DTE E1s Ports All Prev Configuration Worksheets Prt2 Options Value Prt1 Options ValuePrt3 Options Value Prt4 Options Value Network Interface Network Channel Allocation Port Chan Options Value Conf Port Chan Options Value Conf Snmp Trap Value Options General Snmp Value Options Table D-1 Hdsl Network Connector Signal Pin Number Pin Assignments DHdsl Network Interface DTE Interface Table D-2 DTE Connector 120 Ohm Signal Pin Number AUX Port Interface Table D-3 AUX Port Connector Signal Direction Pin Number COM Port Interface Table D-4 COM Port Connector Signal Direction Pin Number Figure D-2. COM Port-to-PC Cable EIA 530A Port Interface Connector Table D-5 EIA 530A Port Interface Connector Signal CircuitDirection Pin Mnemonic Number Figure D-4. EIA 530A-to-RS449 Cable EIA 530A-to-RS449 Cable Interface Table D-6 RS449 Cable Interface Signal Circuit Figure D-5. EIA 530A-to-V.35 Cable EIA 530A-to-V.35 Cable Interface Direction Pin Number Table D-7 Cable Interface Signal Figure D-6. EIA 530A-to-X.21 Cable EIA 530A-to-X.21 Cable Interface Table D-8 Cable Interface Signal Power Input Connector Optional DC Power CableTable D-9 DC Power Connector Signal Pin Number External Clock Interface Table D-10 External Clock Connector Signal Pin Number Management Information Base MIB II RFC Snmp MIB Objects E Interface Group, MIB System Group, MIB Interface Group ± ªifIndexº Object ifEntry Interface Group ± ªifMtuº Object ifEntry IP Group, MIB Interface Group ± ªifLastChangeº Object ifEntry IP Group ± ªipRouteTableº Object ip Icmp Group, MIB Transmission Group, MIBUDP Group, MIB Snmp Group, MIB Near End Group, DS1/E1 MIB DS1/E1 MIB RFC Near End Group ± ªdsx1LoopbackConfigº Object dsx1ConfigEntry DS1 Fractional Group, DS1/E1 MIB Far End Group, DS1/E1 MIB General Port Table, RS-232-like MIB RS-232-like MIB RFC Asynchronous Port Table, RS-232-like MIB Output Signal Table, RS-232-like MIB Input Signal Table, RS-232-like MIBGeneric-Interface Extension MIB RFC Synchronous Port Table, RS-232-like MIB Generic Interface Test Table, Generic Interface MIB Paradyne Enterprise MIB Correlation between Menu Commands and Snmp Objects Set dsx1LoopbackConfig for NET E1 to dsx1NoLoop Set dsx1LoopbackConfig for NET E1 to dsx1LineLoopSet dsx1LoopbackConfig for NET E1 to dsx1PayloadLoop Set dsx1LoopbackConfig for DTE E1 to dsx1LineLoop External Set dsx1LoopbackConfig for port n to noTest Display rs232PortInSpeed or rs232PortOutSpeed for port n Set/Display dsx1FracNumber and dsx1FracIfindex for DTE E1 IP Network Addressing IP Network Addressing Scenario F 135.18.1.2 Front Panel Emulation G Installing Front Panel Emulation Software Starting Front Panel Emulation Equipment List H Equipment Feature Number Activ Glossary BNC CRC4 DSR ISO LOF PDU RFC RIP RJ48C RLB TXC Index Index-2 Index Index-4 Synchronous data port. See Port 1±4 interface Index-6