COMSPHERE 3800 Series Modems

Speaker

Speaker allows you to make temporary adjustments to the modem's speaker volume. Upon a reset, speaker volume returns to its configured setting. For more information on speaker settings, refer to the Misc section in Chapter 9.

To access Speaker from the Control branch, make the following selections:

Control :>

Speaker Reset

F1 F2 F3

Select Speaker.

Speaker Control : >

Off Low Med

F1 F2 F3

Press the key and appropriate function keys to choose the desired selection.

DCP selections are

Off Turns the speaker off.

Low Adjusts speaker to low volume.

Med Adjusts speaker to medium volume.

High Adjusts speaker to high volume.

Command Complete appears on the LCD.

To exit Speaker and remain in the Control branch,

press the key. To exit and return to the Top-Level

menu, press the key.

AT Command Equivalent

The AT commands for ON/Off are M0, M1, and M2. The AT commands for volume control are L0, L1, L2, and L3.

Reset

Reset causes the modem to stop operation and perform a complete program restart. The modem begins the power-up test sequence that ends with the Top-Level menu displayed on the LCD. Configuration options stored in an Active (Saved) configuration area are copied to the Active (Operating) configuration area.

To access Reset from the Control branch, make the following selection:

Control :>

Speaker Reset

F1 F2 F3

Select Reset.

Reset

F1 F2 F3

Reset appears before the modem performs the power-up diagnostic test sequence.

AT Command Equivalent

The AT command for Reset is Z.

10-2

November 1996

3810-A2-GB30-20

Page 111
Image 111
Paradyne 3810 manual Control Speaker Reset, Speaker Control Off Low Med