Paradyne 3810 manual Auto Redial Leased Line, Rate Auto Originate, Auto Redial DTR

COMSPHERE 3800 Series Modems

S-Register

Table 14-2

(3 of 11)

3800 Series S-Registers

Description Front Panel Branch

S35	Auto Redial (Leased Line)			Configure\Edit\Leased Line
	Auto Redial allows repeated automatic dial backup attempts by			(Auto Redial)
	specifying the range of Directory Locations that can be tried. A redial
	attempt is made in response to a bad phone number, a busy signal, no
	answer, or no quiet answer. The modem must be in Originate mode.
	On leased lines with dial backup, Auto Redial works in conjunction with
	the Bad Lines Auto Originate and Rate Auto Originate options.
	Register has the following values:
	S35 = 0 Use Directory Location 1
	S35 = 1 Use Directory Locations 1±2
	S35 = 2 Use Directory Locations 1±3
	S35 = 3 Use Directory Locations 1±4
	S	S	S
	S	S	S
	S35 = 9 Use Directory Locations 1±10
	NOTE: The modem must be in Originate mode to perform an automatic
	dial backup.
S36	Rate Auto Originate			Configure\Edit\Leased Line
	Initiates a dial backup call, using the phone number in directory
	location 1, when the leased-line rate of the modem falls back to or below
	a certain speed.
	Register has the following values:
	S36 = 0	Disable
	S36 = 1 On fallback to 4800
	S36 = 2 On fallback to 7200
	S36 = 3 On fallback to 9600
	S36 = 4 On fallback to 12,000
	S36 = 5 On fallback to 14,400
	S36 = 6 On fallback to 16,800
	NOTE: Rate Auto-Originate is valid only when V.32bis Autorate is
	enabled (S76 = 0).
S37	Auto Redial (DTR)			Configure\Edit\Line_Dialer
	Auto Redial allows repeated automatic dial backup attempts by			(DTR Auto Redial)
	specifying the range of Directory Locations that can be tried. A redial
	attempt is made in response to a bad phone number, a busy signal, no
	answer, or no quiet answer. The modem must be in Originate mode.
	When DTE Dialer Type is DTR=Dirs, Auto Redial works in conjunction
	with the DTR Cont Repeat (S38) configuration option.
	Register has the following values:
	S37 = 0 Use Directory Location 1
	S37 = 1 Use Directory Locations 1±2
	S37 = 2 Use Directory Locations 1±3
	S37 = 3 Use Directory Locations 1±4
	S	S	S
	S	S	S
	S37 = 9 Use Directory Locations 1±10
	NOTE: The modem must be in Originate mode to perform an automatic
	dial backup.

14-18 November 1996 3810-A2-GB30-20