Model 3810 and 3820 Installation

To ensure compliance with FCC Part 15 Regulations, a ferrite choke must be installed on the EIA-232-D interface cable.

1.Open the ferrite choke and place it around the DTE cable as close as possible to the connector attached to the modem.

2.Close the two halves around the cable and snap the ferrite choke shut, pressing down on the plastic latch to secure it.

3.Install a cable tie behind the ferrite choke to prevent it from sliding along the cable.

Figure 2-3. Model 3820 Rear Panel

3810-A2-GB30-20

November 1996

2-5

Page 20
Image 20
Paradyne 3810 manual Model 3820 Rear Panel