Paradyne 3810 manual Register List, Register Format

AT Command Set and S-Registers

S-Register List

S-registers affect the operating parameters of the 3800 Series modems. S-registers are only applicable when the DTE Dialer Type configuration option is set for AT. (See &Mn command.)

Table 14-2 lists all S-registers supported by the

3800 Series modems. The first column lists the S-register. The second column lists all possible values for that register. The third column lists the key sequence used to enter the equivalent from the front panel. Use this column to reference commands in Chapter 9 if further description is necessary.

S-Register Format

S-registers can be displayed and/or modified when the modem is in Command mode. To display the value of an S-register, issue the following command:

TYPE: ATSn?

Where: n is the register number

PRESS: Enter

To modify the value of an S-register, issue the following command:

TYPE: ATSn=r

Where: n is the register number, and r is the new value

PRESS: Enter

In Table 14-2, the value for n is listed in the S-register column, and the value for r is listed in the Description column.

3810-A2-GB30-20 November 1996 14-15