Paradyne 3810 manual 32bis Train, Leased-Line Rate, Leased TX Level, Bad Lines Auto Originate

COMSPHERE 3800 Series Modems

S-Register

Table 14-2

(5 of 11)

3800 Series S-Registers

Description Front Panel Branch

S43	V.32bis Train	Configure\Edit\Dial Line
	Register controls the modem's train time for V.32bis/V.32 mode.
	Register has the following values:
	0 = Long
	1 = Short
	Factory setting is Long.
S44	Leased-Line Rate	Configure\Edit\Leased Line
	Register determines the modem's data rate and modulation scheme for
	operation on either 2-wire or 4-wire leased lines in either Answer or
	Originate mode.
	Register has the following values:

0, 1 = 14,400 (V.32bis)

2= 12,000 (V.32bis)

3= 9600 (V.32bis)

4= 7200 (V.32bis)

5= 4800 (V.32bis)

6= 2400 (V.22bis)

18= 19,200 (V.32terbo)

19= 16,800 (V.32terbo)

Factory setting is 19,200 (V.32terbo).

S45	Leased TX Level		Configure\Edit\Leased Line
	Register determines the modem's transmit power output level over
	leased lines.
	Enter a value from 0 to 15 dBm.
	Factory setting is 0 dBm.
S46	Bad Lines Auto Originate		Configure\Edit\Leased Line
	Register determines if the modem performs an automatic dial backup if
	the leased lines fail.
	Register has the following values:
	0 = Disable
	1	= 30 seconds
	2	= 20 seconds
	3	= 60 seconds
	4	= 90 seconds
	5	= 120 seconds
	S	S
	S	S
	21 = 600 seconds
	Factory setting is Disable. Note that the S46 = 2 command has an effect
	that is out of sequence with the other values.

14-20 November 1996 3810-A2-GB30-20