Paradyne 3810 manual 13-2

COMSPHERE 3800 Series Modems

There are no Diagnostic Control Panel (DCP) functions unique to fax operation. If your fax software requires that you change the configuration of your modem, see the appropriate sections of Chapter 9, Configure Branch.

The DCP is disabled during fax operation.

Your fax software uses AT commands to tell the modem what to do. These commands, and the replies your modem makes (such as ªOKº) may be displayed on your computer terminal during fax operation, but this depends on your software. You do not have to issue AT commands yourself, unless you use AT commands to configure the modem.

For more information about fax operation, see the manual that came with your fax software.

13-2 November 1996 3810-A2-GB30-20