COMSPHERE 3800 Series Modems

Connecting Model 3810 and Model 3820 Modems with Supplied Cables

Figure 2-2 and Figure 2-3 show how Model 3810 and Model 3820 modems are connected to certain TELCO jack types using the supplied cables. For other TELCO connections, refer to Appendix E.

DTE Connection

Use the following procedures to connect the EIA-232-D cable and ferrite choke from the modem to the DTE:

1.Make sure the modem's rear panel power switch is Off.

2.Connect the DB-25-P (male) connector on the cable to the DB-25-S (female) connector labeled DTE (Figures 2-2 and 2-3) on the modem's rear panel. Use a small screwdriver to tighten the cable to the modem.

3.Connect the DB-25-P connector on the cable to the DB-25-S connector on the DTE. Use a small screwdriver to tighten the cable to the DTE.

Figure 2-2. Model 3810 Rear Panel

2-4

November 1996

3810-A2-GB30-20

Page 19
Image 19
Paradyne manual DTE Connection, Model 3810 Rear Panel