COMSPHERE 3800 Series Modems

VF Connector Pin

Assignments

Tables E-3 and E-4 list the connector pin assignments for Model 3810 and Model 3820 modular jacks and the pin assignments for the TELCO jacks. For 2-wire leased-line connections to a JM8 network interface, an

8-position to 6-position crossover cable (see Figure E-1) must be used according to the following FCC requirements:

``The RJ series of jacks should not be used for connecting data equipment to nonswitched private line networks ± specifically, the service equivalents of the pre-divestiture Series 3002 (Category II, Tariff #260) service. There is a substantial difference in transmit levels permitted in the private line service and those permitted in

the public switched network. The industry standard is now an 8-pin keyed modular jack known as the USOC JM8 (Bellcore Technical Reference: TR-EOP-000242, Issue 1, released May 1985.) When ordering the installation of the USOC JM8, specify the appropriate wiring options:

1.2- wire operations

2.4-wire operations w/o TEK leads

3.4-wire operations with TEK leads

TEK leads are for loopback purposes.

A 50-pin version is being considered for multiple line connections.º

Insert the 6-position plug into the LEASED jack of your modem. Insert the 8-position plug into the leased-line network interface.

Figure E-1. Wiring Diagram ± 8-Position to 6-Position Crossover Cable

E-4

November 1996

3810-A2-GB30-20

Page 178
Image 178
Paradyne 3810 manual VF Connector Pin Assignments