Paradyne 3810 manual V32bis Autorate Enable Nxt Enable Disable

COMSPHERE 3800 Series Modems

Table 9-5

(2 of 5)

Leased Line Configuration Options

V32bis Autorate: Enable

Nxt Enable Disable

V.32bis Autorate. Once connected, the modem automatically lowers the line rate if line conditions become impaired. When line conditions improve, the modem automatically shifts up to the highest data rate the line can support. This autorating only occurs between 14,400 bps and 4800 bps during V.32/V.32bis connections.

The factory default is Enable.

AT command for V.32bis Autorate is S-register S82 = n where n is 0 for Enable and 1 for Disable.

Leased TX Level: 0

Nxt 0 ± 1 ± 2 ± 3 ± 4 ± 5 ± 6 ± 7 ± 8 ± 9 ± 10 ± 11 ± 12 ± 13 ± 14 ± 15

Leased Transmit Level. Selects the modem's transmit power level over leased lines. The transmit output level can be selected in 1 dBm decrements from 0 dBm to ±15 dBm.

The factory default is 0 dBm.

AT command is S-register S45 = n, where n is a value from 0 to 15 corresponding from 0 dBm to ±15 dBm.

1800HzTrainTone: Disable Nxt Disable Enable

1800 Hz Training Tone. This configuration option is for communicating with certain modems that do not comply with the V.32 standard. When 1800 Hz Training Tone is enabled, a short burst of 1800 Hz (AC) tone is sent to the answering modem to prompt it to answer. This is not required for V.32-compliant modems.

The factory default is Disable.

AT command is S-register S34 = n, where n is 0 for Disable and 1 for Enable.

9-30 November 1996 3810-A2-GB30-20