Paradyne 3810 manual Maximum Frame Size, Error Control Negotiate Buffer, C0, CTS Control, G0, N5

COMSPHERE 3800 Series Modems

					Table 14-1
					(10 of 12)
				3800 Series AT Commands
AT				Description		Front Panel
Command						Branch
\An	Maximum Frame Size					Configure\Edit\
	\A0		64			V42/MNP/ Buffer
	\A1		128
	\A2		192
	\A3		256
	\A4		32
	\A5		16
\Cn	Error Control Negotiate Buffer					Configure\Edit\
	\C0		Disable.			V42/MNP/Buffer
	\C1		Enable.
	\C2		Disables and switches modem to Buffer mode.
\Dn	CTS Control					Configure\Edit\DTE
	\D0		Forced On. Forces CTS to always ON.			Interface
	\D1		Standard RS232.
	\D2		Wink When Disconnect. CTS is turned Off for 1 to 2 seconds upon a
			disconnect.
	\D3		Follows DTR. The state of CTS follows the state of DTR.
\Gn	Modem to Modem Flow Control					Configure\Edit\
	\G0		Disable.			V42/MNP/Buffer
	\G1		Enable.
\Kn	Break Buffer Control, Send Break Control, Break Forces Escape					Break Buffer Control:
						Configure\Edit\
			Break	Send	Break	V42/MNP/Buffer
			Buffer	Break	Forces	Send Break Control:
			Control	Control	Escape	Configure\Edit\
		\K0	Discard Data	Break First	Enable
						V42/MNP/Buffer
		\K1	Discard Data	Break First	Disable	Break Forces Escape:
		\K2	Keep Data	Break First	Enable
						Configure\Edit\DTE
		\K3	Keep Data	Break First	Disable
						Dialer
		\K4	Keep Data	Data First	Enable
		\K5	Keep Data	Data First	Disable
		\K6	Discard Break	Not Applic.	Disable
\Nn	Error Control Mode					Configure\Edit\
	\N0		Buffer Mode.			V42/MNP/Buffer
	\N1		Direct Mode.
	\N2		MNP or Disconnect.
	\N3		MNP or Buffer.
	\N4		V.42/MNP or Disconnect.
	\N5		V.42/MNP or Buffer.
	\N6		LAPM or Disconnect.
	\N7		LAPM or Buffer.

14-12 November 1996 3810-A2-GB30-20