Chapter 2: Using Basic Features

Updating a Contact’s Ringtone

You can set distinctive ring tones for contacts in your Contact Directory so you can identify callers when your phone rings.

To select a ringtone for a contact:

1From your directory, tap the contact to assign a distinctive ring tone to.

2From the contact’s information screen, tap .

3From the Edit Contact screen, tap Ring Type, tap the ringtone you want, and then tap .

4From the Edit Contact screen, tap Save.

Changing the Speaker Volume

To change the volume of what you hear during a call, press one of the Volume keys, , to lower or raise the speaker volume.

Changing the Ringer Volume

To change the volume of the incoming call ringtone, press one of the Volume keys, , while your phone is idle or ringing.

Muting the Microphone

Mute the microphone so other parties can’t hear you. Microphone Mute applies to all modes (handset, headset, and speakerphone). You can still hear all other parties while Mute is enabled.

To mute the microphone:

During a call (including a conference call), press .

The Mute key glows red. The other parties can’t hear you. To disable Mute, press again.

Choosing Where You Hear Sound Effects

You can choose whether you hear sound effects—all phone sounds except call audio—from the handset, headset, or speaker. For example, you can configure your phone to ring on your headset, instead of the speaker. By default, you hear all sound effects from the speaker.

41

Page 53
Image 53
Polycom 500 Updating a Contact’s Ringtone, Changing the Speaker Volume, Changing the Ringer Volume, Muting the Microphone