Polycom VS4000 manual Using the Web Interface, To configure your browser to use the web interface

Administrator’s Guide for ViewStation EX, ViewStation FX, and VS4000

Using the Web Interface

You can use the web interface to perform most of the calling and configuration tasks you can perform on the local system.

To configure your browser to use the web interface:

1.Be sure that your web browser uses one of these software versions:

•Microsoft Internet Explorer 5.5 or later.

•Netscape 6.0 or later.

2.Configure these settings:

	Internet
	Explorer	Netscape
Allow cookies	Enabled	Enabled
Force pages to reload on every visit to	Enabled	N/A
a page
Set cache to compare page in cache	N/A	Enabled
with page on network every time
Enable Javascript	N/A	Enabled

To access the system using the web interface:

1.On a PC, open a web browser.

2.In the browser address line, enter the system’s IP address, for example, http://255.255.255.255, to go to the system’s web interface.

3.Enter admin as the user name, and the admin password, if a password has been established.

You can use the web interface to configure all of the system settings except the remote management settings. For security reasons, these settings must be configured on the local system by an administrator.

5-2 www.polycom.com/videodocumentation