Printronix P9000 Series manual Line Spacing 8 or 10.3 lpi One Line Only, Patibility

Line Spacing 8 or 10.3 lpi (One Line Only)

	ASCII	Hex	Decimal
P-Series	ACK	06	06
	SFCC f	SFCC 66	SFCC 102
Serial	N/A	N/A	N/A
Purpose	Selects line spacing of 1/8 or 7/72 inch for the current line only.
Comment	The default line spacing is reselected automatically after one line. Line spacF
	ing may be selected either by the control panel 6/8 LPI switch or by line spacF

ing control codes. The control code setting will override the setting on the display.

	8 and 10.3 lpi spacing for one line applies only to P-Series programming comF
	patibility.
	If the alternate line spacing selected from the control panel is 8 lpi, the ACK
	control code will set the line spacing to 8 lpi. If 10.3 lpi was selected from the
	control panel, the ACK control code will set the line spacing to 10.3 lpi
	(7/72").
	In Serial Matrix printer protocol, this line spacing command for a single line
	can be accomplished by using ESC J (Line Feed n/216-Inch), where: n=27
	for 8 lpi, or n=21 for 10.3 lpi, and Line Feed = Newline.
	Serial Matrix compatible control code ESC 0 and P-Series SFCC 0 can be
	used for continuous 1/8-inch line spacing.
Example	The following example illustrates printing a single line of text at 8 lpi.

6-50 Programming