Printronix P9000 Series manual Download a Language, Able symbol code point

Download a Language

	ASCII	Hex	Decimal
P-Series	SFCC V	SFCC 56	SFCC 86
Serial	ESC V	1B 56	27 86
Purpose	To define and download an international language character substitution taF
	ble which can be placed within the 224 printable symbol code points.
Expression	SFCC V is followed by ASCII characters: {QQQ}E{AAA}E{SSSSS}E

NOTE: Each parameter is visually separated by paired brace symbols for clarity in distin/ guishing parameters. Do not input these brace pairs in the command sequence.

where	E is the terminator following each numeric field.
	{QQQ} represents a decimal value between 0 and 255 identifying the
	number of entries in the substitution table. No leading zeros are required
	for one- and two-digit entries. Each entry consists of:
	{AAA} representing the decimal value between 0 and 255 identifying
	the address code that will cause the substituted character to be
	printed. No leading zeros are required for one- and two-digit enF
	tries;
	{SSSSS} representing the decimal value between 0 and 65535 idenF
	tifying the symbol point in the Printronix standard Character Library
	(page NO TAG). No leading zeros are required for less than 5-digit
	entries.
Comment	The character substitution table is valid only for the current base character
	set. The character substitution table cannot be accessed within another charF
	acter set or after changes have been made to the current character set. Any
	symbol within the Character Library in the Multinational Character Sets
	chapter (including downloaded characters) can be substituted into any printF
	able symbol code point.
	If {AAA} is the same value as a control character, the control character takes
	precedence, and printing of that value will not occur. If the Space (20 hex) is
	substituted, unexpected results may occur, including decreased print speed.
	Once defined and downloaded by this control code, the table created by this
	control code can be saved into printer power-up configuration and selected
	from the host interface or the control panel. When selected from the host,
	Download a Language is accessed using SFCC RX (Character Set Select: InF
	ternational Languages). When selected via control panel, the message display
	will read •DOWNLOADED," and a configuration printout will read
	DOWNLOADED in the international language section of the printout.

Programming 6-31