
RIBBON LIFE 100%
STOP PRINTER *
To select the AUDIO/VISUAL ALARM action when the ribbon is worn, press NEXT; when AUD/VIS ALARM is displayed, press ENTER.
RIBBON LIFE 100%
AUD/VIS ALARM *
To select the VISUAL ALARM action, press NEXT; when VISUAL ALARM is displayed, press ENTER.
RIBBON LIFE 100%
VISUAL ALARM *
7.Reset for a New Ribbon
If a new ribbon was not installed, skip this step. If a new ribbon was installed and is the same size as the previous one,
RIBBON LIFE 100%
NEW RIBBON
8.Check for Proper Ribbon Size
If the new ribbon is a different size than the previous one, set the new size. Consecutively press CLEAR to return to OFFLINE READY, then
Select the appropriate value by pressing NEXT until the number appears in the message display. Press ENTER to enter this new value. The message below should appear in the message display. A message to change the ribbon will appear if the ribbon was not just changed.
CURRENT | 60 |
NEW SIZE | 80 |
OPTIONAL: To lock the printer configuration, press MENU UP and MENU DOWN simultaneously until ENTER SWITCH LOCKED appears briefly in the message dis/ play.
9.Go On Line to Begin Printing
Press ON LINE to begin printing. Notice the 100% ribbon life value in the upper right corner of the display. This display shows the remaining usable ribbon life as the job proF
RibbonMinder |