Printronix P9000 Series manual Skip-Over Perforation

Skip-Over Perforation

	ASCII	Hex	Decimal
P-Series	N/A
Serial	ESC N n	1B 4E n	27 78 n

Purpose	Selects the number of lines (at the current line spacing) for the paper •skip" at
	the bottom of the perforated page.
where	n = 1 to 127 to select the number of lines to skip. If the value of n exceeds
	the current forms length, it is ignored.
Comment	The actual distance set is the product of •n" and the current line spacing. FacF
	tory default value disables skip-over perforation. The current default value
	may be set by the operator. Setting a new forms length (ESC C) resets skip-
	over perforation to zero.
	This feature is disabled whenever vertical tabs are set.
	Skip-over perforation can also be selected from the control panel; however,
	vertical tabs within the skip-over perforation zone, as set by the control panF
	el, are ignored. The control code skip-over perforation setting from the host
	computer will override the control panel setting.

Programming 6-65