Printronix P9000 Series manual Line Spacing 1/6 Inch, Sfcc

Line Spacing 1/6 Inch

	ASCII	Hex	Decimal
P-Series	SFCC LPI;n
	SFCC 2	SFCC 32	SFCC 50
Serial	ESC 2	1B 32	27 50
Purpose	Sets line spacing to 6 lpi or as set by ESC A.
Comment	The value of n can be 6 or 8 only. In LPI mode using P-Series printer protoF
	col, if n = 6, this command sets line spacing to 1/6 inch. Values of n other than

6 or 8 will cause an error message (Command Line Error Messages are listed on page 6-3).

SFCC/ESC 2 asserts n/72-inch line spacing as set by SFCC/ESC A (page 6-52). If no distance has been set by SFCC/ESC A, the distance is 1/6 inch.

The control code line spacing selection will override the control panel line spacing setting.

Example The following example illustrates 1/6-inch line spacing and assumes that a distance has not been set by ESC A.

6-48 Programming