Printronix P9000 Series manual Form Feed

Form Feed

	ASCII	Hex	Decimal
P-Series/
Serial	FF	0C	12

Purpose Prints the data in the buffer, advances the paper to the next top-of-form, and moves the printhead to the first character column.

Comment The default forms length is determined by the configuration in nonvolatile memory. Forms length is set by using the control panel F/L switch or forms length control codes. Code FF cancels all single-line only print attributes.

The Form Feed command will react differently in the P-Series and Serial Matrix emulation modes when the VFU is active. Refer to the Vertical ForF mat Units chapter.

Programming 6-41