2.Projecting an Image

1.Press the [Auto set] button.

CLB034

Depending on the type of input signal, some images may not be displayed or correctly adjusted. If this happens, adjust the image with [Position] in [Image Adjustment]. For details about the types of signals that can be input to the projector, see p.127 "List of Compatible Signals".

Adjusting the Volume of the Speaker

1.Press the [Volume] and [Volume ] buttons to adjust the volume.

CLB035

The value bar appears at the bottom of the screen. Press the [] button to increase the volume. Press the [ ] button to decrease the volume.

• You can also adjust the volume of the speaker from the control panel on the projector.

Manipulating Images with the Remote Control

Use the remote control to manipulate projected images.

40

Page 42
Image 42
Ricoh WX4130n Adjusting the Volume of the Speaker, Manipulating Images with the Remote Control, Press the Auto set button