
|
| Common Problems |
|
|
|
|
|
|
Problem |
| Solutions |
|
|
|
The remote control does not | • | Make sure the ID assigned to the remote control and in |
respond. |
| the settings of [Remote Control ID] in [Default Settings] |
|
| are the same. |
|
| For details, see p.90 "Default Settings Menu". |
| • Make sure the batteries in the remote control are not | |
|
| dead. |
| • Make sure the batteries are correctly loaded into the | |
|
| remote control. |
|
| For details, see p.21 "Loading Batteries into the Remote |
|
| Control". |
| • Make sure the remote control is inside its effective range. | |
|
| For details, see p.20 "Effective Range of the Remote |
|
| Control". |
| • | Make sure there is nothing placed between the remote |
|
| control and the projector. |
| • Make sure the remote control receiver is not exposed to | |
|
| strong light. |
|
|
|
No images from USB devices. | • | Make sure the USB memory device is connected |
|
| correctly. |
| • | Make sure the connected USB memory device is |
|
| compatible with the projector. |
| • | Make sure there are JPEG or MPEG files saved on the |
|
| USB memory device. |
| • Make sure the compression format, file size, and other | |
|
| conditions are compatible with the projector. |
|
| For details, see p.46 "Projecting Images from a USB |
|
| Memory Device or Digital Camera". |
|
|
|
Wired LAN is disabled. | • | Check the settings of [Wired LAN Settings] in [Network |
|
| Settings] under [Network/USB Settings]. |
|
| For details, see p.96 "Network Settings". |
|
|
|
113