6.Maintenance
•Depending on the setting in [Standby Energy Saving], the projector does not respond even if the projector is in standby mode. Press the [Power] button, or change the setting in [Standby Energy Saving].
•If a communications error prevents the projector from being detected, "?" is displayed. If the connection failed due to an incorrect password or other reason, "×" is displayed.
•The details displayed in the Projector Management Utility "Input" and the corresponding projector input signals are described below:
Projector input signal | PJLink input name |
|
|
Computer | RGB1 |
|
|
Y/Pb/Pr | RGB2 |
|
|
HDMI | DIGITAL1 |
|
|
Video | VIDEO1 |
|
|
Network | NETWORK1 |
|
|
USB Memory | STORAGE1 |
|
|
• See the Projector Management Utility Help for how to use Projector Management Utility.
122
