Ricoh WX4130n operating instructions

4. Changing the Projector Settings

• 4

Power Off on No Signal

Select the time from the final operation to automatic power shutdown when there are no input signals.

Default: [Off]

•Off

•5 min.

•10 min.

•20 min.

•30 min.

Power On Method

Select whether or not to use the auto power on function. Default: [Manual]

•Manual

Turn the projector on when the [Power] button is pressed.

•Auto.

Automatically turn on the projector when the power cord is connected.

Standby Energy Saving

Select the level of energy saving while on standby.

You can save power by using this function. The energy saving level is highest when you select [High] and lowest when you select [None]. However, this function affects network functions and start-up time. Select a mode according to how you use the projector.

Default: [Medium]

•High

Wired LAN and Wireless LAN are disabled when the projector is in standby.

•Medium

Wired LAN is enabled but Wireless LAN is disabled when the projector is in standby.

•Low

Wired LAN and Wireless LAN are enabled.

•None

Wired LAN and Wireless LAN are enabled. Start-up time is faster.

Lamp Power

Select the lamp power level.

Select [Eco] if the image is too bright or when projecting images in a dark room.

92