Sharp FO-DC500 operation manual 104, Then To select

Inbound Routing

2	Press	START/	and then	to select
		ENTER

FAX TRANSFER SETTING.

ENTRY MODE 07:SYSTEM # MODE 08:STORE JUNK FAX # 09:DEPT. PASSCODE 10:BOOK ENTRY MODE 11:FAX TRANSFER SETTING

3

4

Press	START/	. Make sure that SET is	3:ENFAX TRANSFERYMODE SETTING
	ENTER			1=SET
			ENTER #(01-10, , )
selected.				2=CLEAR
				3=ON/OFF
Press	START/			FAX TRANSFER SET
				SETTING #=
	ENTER .

5

6

Enter a 2-digit number from 01 to 41. This number is used to identify the set that you are storing.

Enter a name for the set by pressing the letter entry keys (see Step 6 on

page 26). (Maximum of 20 characters.)

If you don’t want to enter a name, go directly to Step 7.

7

START/

Press ENTER .

•If “TRANSFER ALL” has already been selected for a set, or if you are storing the set from a personal book, you must enter one or more sender’s numbers (the display at right does not appear). Go to step 10.

FAX3:ENTRANSFERYMODE SET # 01 ENTER1=INPUT#(01TSI#-10, , )

2=TRANSFER ALL

The set number appears here

8

9

Press or to select INPUT TSI# if you wish to only forward faxes from specific sender’s numbers.

Select TRANSFER ALL if you wish to forward all received faxes.

START/

Press ENTER .

•If you selected TRANSFER ALL in Step 8, go to step 12.

104