Sharp FO-DC500 Entering Your Name and Fax Number, Press, Then, Until OWN Passcode SET is selected

Entering Your Name and Fax Number

Entering Your Name and Fax Number

Before you can begin using the machine, you must program your name and fax number. Once you program this information, it will appear automatically at the top of each fax page you send.

Important!

FCC regulations require that your name, telephone/fax number, and the date and time appear on each fax message you send. Enter your name and fax number here and set the date and time as explained in the following section to have the machine include this information automatically at the top of your fax messages.

Note: If you have installed the dual-line option, use the procedure on page 66 to enter your name and the number of each line.

1. Installation

1 Press MENU and then or

until ENTRY MODE is selected in the display.

Display:

MENU MODE 1:RECEIVE MODE 2:LISTING MODE 3:ENTRY MODE

2	Press	START/	and then	or	ENTRY MODE
		ENTER			01:DESTINATION SETTING
	until OWN PASSCODE SET is selected.				02:PASSCODE SETTING
					03:OWN PASSCODE SET
3	Press	START/			OWN PASSCODE SET
					SENDER’S NUMBER
		ENTER .

4 Enter your fax number (max. of 20 digits) by pressing the numeric keys.

•To insert a space between digits, press .

• To clear a mistake, press	STOP
	.

25