Sharp FO-DC500 operation manual

Inbound Routing

14 To activate the set immediately, make sure that ACTIVATE NOW is

START/

selected in the display and press ENTER .

If you do not want to activate the set, press or to select

START/

ACTIVATE LATER and press ENTER .

STOP

15 Press repeatedly to return to the date and time display.

Deleting a set

♦To delete a set that was created in a personal book, open the book before performing the steps below.

♦To delete a set, you will need to know its number. To check the number, print the Fax Transfer List as explained on page 200.

1 Press MENU and then or

until ENTRY MODE is selected in the display.

Display:

MENU MODE 1:RECEIVE MODE 2:LISTING MODE 3:ENTRY MODE

2	Press	START/	and then	to select
		ENTER

FAX TRANSFER SETTING.

ENTRY MODE 07:SYSTEM # MODE 08:STORE JUNK FAX # 09:DEPT. PASSCODE 10:BOOK ENTRY MODE 11:FAX TRANSFER SETTING

3	Press	START/	. and then	or	to
		ENTER

select CLEAR.

FAX3:ENTRANSFERYMODE SETTING

1=SET

ENTER #(01-10, , )

2=CLEAR 3=ON/OFF

4 START/

Press ENTER .

FAX TRANSFER CLEAR SETTING #=

106