Sharp FO-DC500 Blocking Reception of Unwanted Faxes, 183, Until Store Junk FAX # is selected

Blocking Reception of Unwanted Faxes

Blocking Reception of Unwanted Faxes

The Anti Junk Fax function allows you to block reception of faxes from parties that you specify. This saves paper by not printing out unwanted "junk" faxes.

To use this function, first turn it on by setting Option Setting 20 (Anti-Junk Fax) to ON as explained on page 195, and then enter the fax numbers from which you do not want to receive faxes as explained below.

♦Up to 50 numbers can be entered in the Anti Junk Number List.

♦To clear a number from the Anti Junk Number List, you need to know the 2- digit number that identifies it. If you have forgotten this number, print out the Anti Junk Number List as explained on page 200.

1	Press MENU and then	or	Display:
			MENU MODE
	until ENTRY MODE is selected in the
			1:RECEIVE MODE
	display.
			2:LISTING MODE
			3:ENTRY MODE

2	Press	START/	and then	or
		ENTER

until STORE JUNK FAX # is selected.

ENTRY MODE 06:ID # MODE 07:SYSTEM # MODE 08:STORE JUNK FAX # 09:DEPT. PASSCODE 10:BOOK ENTRY MODE

3	Press	START/	JUNK FAX # MODE
		ENTER .	1=SET
			2=CLEAR
4			START/
	Make sure that “SET” is selected and then press ENTER .

START/

(To clear a number from the list, select CLEAR and then press ENTER .)

6. Special Functions

183