Sharp FO-DC500 operation manual

Sending a Fax by Automatic Dialing

Searching for an auto-dial number

If you don’t remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial it

and transmit the loaded document by simply pressing	START/
	ENTER .

♦ You can also use this procedure to search for Group Keys and Program Keys (the name you programmed for the Group or Program key will appear). This can be done at any point in a transmission or polling procedure where you need to press a Group Key or a Program Key.

1 Load the document(s).

SEND READY will appear in the display.

• Press RESOLUTION and/or CONTRAST	to
set the resolution and contrast if
needed.
2 Press A to search from the		Display:
		SEARCH [ ]
beginning of the alphabet, or Z	to	AAAAAAA
		AAAAAAAAA
search from the end.		BBBBBBBB

The names of your stored destinations appear

3 Enter the first character of the stored name by pressing the appropriate letter entry key.

•If you don’t remember the first letter, go to Step 4 (you will scroll through the list from the beginning).

4 Press or to scroll through the names. Stop when the desired name appears in the display.

Send/Receive	Documents
2.

49