Sharp FO-DC500 Checking the status of the current job, To cancel a fax transmission or reception

JOB STATUS

JOB STATUS

Sending a Fax by Automatic Dialing

Checking the status of the current job

The display normally shows the date and time and prompts related to operations you are performing. To check and see what number the machine is currently calling or transmitting to, or what number the machine is currently receiving a

document from (if this information is available), press . Information on the current fax job (FAX STATUS) will appear in the display. If the dual line option is installed, the fax status will appear separately for each line. To switch back to the

date and time display, press one or more times as needed. (If the network printer option is installed, the NETWORK PRINT STATUS screen showing current printer activity will also appear.)

To cancel a fax transmission or reception

To cancel a fax transmission or reception that is currently in progress, press

JOB STATUS so that the status of the transmission or reception appears in the

STOP

FAX-STATUS display, and then press .

Checking and canceling stored transmission jobs

To display information on fax jobs that are waiting in memory for transmission, follow the steps below. You can also use this procedure to cancel a fax job.

Send/Receive	Documents
2.

1 Press	MEM.STATUS	(flip up the Rapid Key
	B

overlay) and then or until MEMORY TX STATUS is selected in the display.

Display:

MEMORY STATUS REPORT 1:COPY STATUS 2:MEMORY TX STATUS 3:MEMORY RX STATUS 4:MESSAGE CLEAR

2	START/			Number of stored		3-digit memory
	Press ENTER .			transmission jobs		number assiged to job
	• The fax jobs appear.
					TX STATUS (004)
					001:M#132	10:34 AM
	• To print out the list of the jobs,				XXXXX Co.: RECALL (01)
		REPORT			002:M#135	10:38 AM
	press		.		YYYYYY Co.: WAITING
		N/*
			Name or number
			of destination			Status of job

51