Sharp FO-DC500 operation manual 168, This is not possible if you included a timer setting or are

Entering and Using Programs

13 Go to the specific procedure for your operation (see the following pages).

Transmission (SEND MODE)

(Continued from Initial procedure.)

14 Dial the receiving machine using one of the following methods:

•Press a Rapid Key.

• Press SPEED DIAL and enter a Speed Dial number (if you enter less than 3

15

16

START/

digits, press ENTER to complete the entry).

•Enter a full fax number with the numeric keys.

•	Press	e-mail	, enter an e-mail address, and then press	START/	. (Only if the
				ENTER

network scanner option is installed.)

START/

Press ENTER .

Press RESOLUTION and/or	CONTRAST to adjust the resolution and contrast if
desired, and then press	START/
	ENTER .

17		START/
	If you want the document to be sent through memory, press ENTER .
	If you want the document to be sent directly from the feeder, press
	DOCUMENT	. (This is not possible if you included a timer setting or are
	M/?

sending the document to an e-mail, FTP, or Desktop destination.)

STOP

18 Press repeatedly until you return to the date and time display.

168