Sharp FO-DC500 operation manual 143, Make sure that SET is selected

Broadcasting

4 Make sure that “SET” is selected and		GROUP SET
START/		PRESS GROUP KEY
then press ENTER .
(To clear a Group Key, select CLEAR
START/
and then press ENTER .)
5 Press any Rapid Key not already	01	02	03	04		05	06		07		08		09		10
	Q / !	W / "	E / #	R /	$	T / %	Y /	&	U /	'	I /	(	O /	)	P	/ =
programmed to select it as a Group	11	12	13	14		15	16		17		18		19		20
	SYMBOL	A /	S	D		F	G /	{	H /	}	J /	[	K /	]	L	/ +
Key.	21	22	23	24		25	26		27		28		29		30
	31	32	33	34		35	B		36		37		38		39
	Caps Lock Z / <		X / >	C		V			N / *		M / ?		@		.com
	SHIFT	/ ^	/ / \	; /	:	Space			_		-		. /	,	DEL
(If you are clearing a Group Key,
press it and go to Step 9.)		ENTER NAME
		USING KEYBOARD

6 Enter a name for the Group Key by pressing the letter entry keys (see Step 6 on page 26). (Maximum of 20 characters.)

If you don’t want to enter a name, go directly to Step 7.

7 START/

Press ENTER .

8 Enter the destinations using any of the following methods:

•Press a Rapid Key.

• Press SPEED DIAL and enter a Speed Dial number. (If you enter less than 3

digits for the number, press	START/	to complete the entry.)
	ENTER

Note: If you need to delete a destination, press or to select the

destination and then press	STOP
	.

Note: Scan to FTP and Scan to Desktop destinations cannot be selected.

6. Special Functions

143