Siemens S7-300 appendix Index-1

		Table of contents
	6.5	CPU 314C-2 PtP and CPU 314C-2 DP	6-21
	6.6	Technical data of the integrated I/O	6-28
	6.6.1	Arrangement and usage of integrated I/Os	6-28
	6.6.2	Analog I/O	6-34
	6.6.3	Configuration	6-39
	6.6.4	Interrupts	6-45
	6.6.5	Diagnostics	6-46
	6.6.6	Digital inputs	6-46
	6.6.7	Digital outputs	6-48
	6.6.8	Analog inputs	6-51
	6.6.9	Analog outputs	6-53
7	Technical data of CPU 31x		7-1
	7.1	General technical data	7-1
	7.1.1	Dimensions of CPU 31x	7-1
	7.1.2	Technical data of the Micro Memory Card (MMC)	7-2
	7.2	CPU 312	7-3
	7.3	CPU 314	7-8
	7.4	CPU 315-2 DP	7-13
	7.5	CPU 315-2 PN/DP	7-19
	7.6	CPU 317-2 DP	7-26
	7.7	CPU 317-2 PN/DP	7-33
A	Appendix	.................................................................................................................................................	A-1
	A.1	Information about upgrading to a CPU 31xC or CPU 31x	A-1
	A.1.1	Area of applicability	A-1
	A.1.2	Changed behavior of certain SFCs	A-2
	A.1.3	Interrupt events from distributed I/Os while the CPU status is in STOP	A-4
	A.1.4	Runtimes that change while the program is running	A-5
	A.1.5	Converting the diagnostic addresses of DP slaves	A-5
	A.1.6	Reusing existing hardware configurations	A-6
	A.1.7	Replacing a CPU 31xC/31x	A-6
	A.1.8	Using consistent data areas in the process image of a DP slave system	A-7
	A.1.9	Load memory concept for the CPU 31xC/31x	A-8
	A.1.10	PG/OP functions	A-8
	A.1.11	Routing for the CPU 31xC/31x as an intelligent slave	A-8
	A.1.12	Changed retentive behavior for CPUs with firmware >= V2.1.0	A-9
	A.1.13	FMs/CPs with separate MPI address in the central rack of a CPU 315-2 PN/DP / CPU 317 ...	A-9
	A.1.14	Using loadable blocks for S7 communication for the integrated PROFINET interface	A-10
	Glossary	..................................................................................................................................... Glossary-1
	Index	Index-1

CPU 31xC and CPU 31x, Technical data	ix
Manual, Edition 08/2004, A5E00105475-05